اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدModerate-Resolution Holographic Spectrograph
55
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
We present a new scheme of a moderate-resolution spectrograph based on a cascade of serial holographic gratings each of which produces an individual spectrum with a resolution of about 6000 and a bandwidth of 80 nm. The gratings ensure centering of each part of the spectrum they produce so as to provide uniform coverage of the broadest possible wavelength interval. In this study we manage to simultaneously cover the 430-680 nm interval without gaps using three gratings. Efficiency of the spectrograph optical system itself from the entrance slit to the CCD detector is typically of about 60 % with a maximum of 75 %. We discuss the advantages and drawbacks of the new spectrograph scheme as well as the astrophysical tasks for which the instrument can be used.
قيم البحث
اقرأ أيضاً
The Maunakea Spectroscopic Explorer (MSE) Project is a planned replacement for the existing 3.6-m Canada France Hawaii Telescope (CFHT) into a 10-m class dedicated wide field highly multiplexed fibre fed spectroscopic facility. MSE seeks to tackle ba
sic science questions ranging from the origin of stars and stellar systems, Galaxy archaeology at early times, galaxy evolution across cosmic time, to cosmology and the nature of dark matter and dark energy. MSE will be a primary follow-up facility for many key future photometric and astrometric surveys, as well as a major component in the study of the multi-wavelength Universe. The MSE is based on a prime focus telescope concept which illuminate 3200 fibres or more. These fibres are feeding a Low Moderate Resolution (LMR) spectrograph and a High Resolution (HR). The LMR will provide 2 resolution modes at R>2500 and R>5000 on a wavelength range of 360 to 950 nm and a resolution of R>3000 on the 950 nm to 1300 nm bandwidth. Possibly the H band will be also covered by a second NIR mode from ranging from 1450 to 1780 nm. The HR will have a resolution of R>39000 on the 360 to 600 nm wavelength range and R>20000 on the 600 to 900 nm bandwidth. This paper presents the LMR design after its Conceptual Design Review held in June 2017. It focuses on the general concept, optical and mechanical design of the instrument. It describes the associated preliminary expected performances especially concerning optical and thermal performances.
Observing at the VLT Coude focus can boost the collecting area by combining light from multiple VLT unit telescopes (UTs; albeit with some losses in the light train). An instrument at the Coude enjoys significant operational flexibility advantage: it
can be attached to any available UT and the extra instrument can help to match better the observing constraints with the current conditions. With modifications to the existing train it can even observe in parallel with ESPRESSO with different UTs. Here we consider a general purpose VLT Coude fiber-fed low-resolution facility spectrograph - provisionally named Cappuccino - suitable for rapid follow up and characterization of faint transients, for late-stage monitoring of transients and for rapid classification under poor conditions or during twilight. Like any instrument of its class, Cappuccino can be used to address diverse set of science questions. The building cost can be reduced greatly if it is based - with modest changes - on existing hardware.
In the present work we discuss a possibility to build an instrument with two operation modes - spectral and imaging ones. The key element of such instrument is a dispersive and filtering unit consisting of two narrowband volume-phase holographic grat
ings. Each of them provides high diffraction efficiency in a relatively narrow spectral range of a few tens of nanometers. Besides, the position of this working band is highly dependent on the angle of incidence. So we propose to use a couple of such gratings to implement the two operational modes. The gratings are mounted in a collimated beam one after another. In the spectroscopic mode the gratings are turned on such angle that the diffraction efficiency curves coincide, thus the beams diffracted on the first grating are diffracted twice on the second one and a high-dispersion spectrum in a narrow range is formed. If the collimating and camera lenses are corrected for a wide field it is possible to use a long slit and register the spectra from its different points separately. In the imaging mode the gratings are turned to such angle that the efficiency curves intersect in a very narrow wavelength range. So the beams diffracted on the first grating are filtered out by the second one except of the spectral component, which forms the image. In this case the instrument works without slit diaphragm on the entrance. We provide an example design to illustrate the proposed concept. This optical scheme works in the region around 656 nm with F/# of 6.3. In the spectroscopic mode it provides a spectrum for the region from 641 to 671 nm with reciprocal linear dispersion of 1.4 nm/mm and the spectral resolving power higher than 14000. In the imaging mode it covers linear 12mm x 12mm field of view with spatial resolution of 15-30 lines/mm.
HIRES will be the high-resolution spectrograph of the European Extremely Large Telescope at optical and near-infrared wavelengths. It consists of three fibre-fed spectrographs providing a wavelength coverage of 0.4-1.8 mic (goal 0.35-1.8 mic) at a sp
ectral resolution of ~100,000. The fibre-feeding allows HIRES to have several, interchangeable observing modes including a SCAO module and a small diffraction-limited IFU in the NIR. Therefore, it will be able to operate both in seeing and diffraction-limited modes. ELT-HIRES has a wide range of science cases spanning nearly all areas of research in astrophysics and even fundamental physics. Some of the top science cases will be the detection of bio signatures from exoplanet atmospheres, finding the fingerprints of the first generation of stars (PopIII), tests on the stability of Natures fundamental couplings, and the direct detection of the cosmic acceleration. The HIRES consortium is composed of more than 30 institutes from 14 countries, forming a team of more than 200 scientists and engineers.
The Visible Integral-field Replicable Unit Spectrograph (VIRUS) is a baseline array of 150 copies of a simple, fiber-fed integral field spectrograph that will be deployed on the Hobby-Eberly Telescope (HET). VIRUS is the first optical astronomical in
strument to be replicated on an industrial scale, and represents a relatively inexpensive solution for carrying out large-area spectroscopic surveys, such as the HET Dark Energy Experiment (HETDEX). Each spectrograph contains a volume phase holographic (VPH) grating with a 138 mm diameter clear aperture as its dispersing element. The instrument utilizes the grating in first-order for 350-550 nm. Including witness samples, a suite of 170 VPH gratings has been mass produced for VIRUS. Here, we present the design of the VIRUS VPH gratings and a discussion of their mass production. We additionally present the design and functionality of a custom apparatus that has been used to rapidly test the first-order diffraction efficiency of the gratings for various discrete wavelengths within the VIRUS spectral range. This device has been used to perform both in-situ tests to monitor the effects of adjustments to the production prescription as well as to carry out the final acceptance tests of the gratings diffraction efficiency. Finally, we present the as-built performance results for the entire suite of VPH gratings.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
