ترغب بنشر مسار تعليمي؟ اضغط هنا

Numerical optimization of writer and media for bit patterned magnetic recording

126   0   0.0 ( 0 )
 نشر من قبل Alexander Kovacs
 تاريخ النشر 2016
  مجال البحث فيزياء
والبحث باللغة English
 تأليف A. Kovacs




اسأل ChatGPT حول البحث

In this work we present a micromagnetic study of the performance potential of bit-patterned (BP) magnetic recording media via joint optimization of the design of the media and of the magnetic write heads. Because the design space is large and complex, we developed a novel computational framework suitable for parallel implementation on compute clusters. Our technique combines advanced global optimization algorithms and finite-element micromagnetic solvers. Targeting data bit densities of $4mathrm{Tb}/mathrm{in}^2$, we optimize designs for centered, staggered, and shingled BP writing. The magnetization dynamics of the switching of the exchange-coupled composite BP islands of the media is treated micromagnetically. Our simulation framework takes into account not only the dynamics of on-track errors but also of the thermally induced adjacent-track erasure. With co-optimized write heads, the results show superior performance of shingled BP magnetic recording where we identify two particular designs achieving write bit-error rates of $1.5mathrm{x}10^{-8}$ and $8.4mathrm{x}10^{-8}$, respectively. A detailed description of the key design features of these designs is provided and contrasted with centered and staggered BP designs which yielded write bit error rates of only $2.8mathrm{x}10^{-3}$ (centered design) and $1.7mathrm{x}10^{-2}$ (staggered design) even under optimized conditions.



قيم البحث

اقرأ أيضاً

110 - A. Kovacs , H. Oezelt , S. Bance 2015
A fully-automated pole-tip shape optimization tool, involving write head geometry construction, meshing, micromagnetic simulation and evaluation, is presented. Optimizations have been performed for three different writing schemes (centered, staggered and shingled) for an underlying bit patterned media with an areal density of 2.12 Tdots/in$^2$ . Optimizations were performed for a single-phase media with 10 nm thickness and a mag spacing of 8 nm. From the computed write field and its gradient and the minimum energy barrier during writing for islands on the adjacent track, the overall write error rate is computed. The overall write errors are 0.7, 0.08, and 2.8 x 10$^{-5}$ for centered writing, staggered writing, and shingled writing.
Bit Patterned Media (BPM) for magnetic recording provide a route to densities $>1 Tb/in^2$ and circumvents many of the challenges associated with conventional granular media technology. Instead of recording a bit on an ensemble of random grains, BPM uses an array of lithographically defined isolated magnetic islands, each of which stores one bit. Fabrication of BPM is viewed as the greatest challenge for its commercialization. In this article we describe a BPM fabrication method which combines e-beam lithography, directed self-assembly of block copolymers, self-aligned double patterning, nanoimprint lithography, and ion milling to generate BPM based on CoCrPt alloys. This combination of fabrication technologies achieves feature sizes of $<10 nm$, significantly smaller than what conventional semiconductor nanofabrication methods can achieve. In contrast to earlier work which used hexagonal close-packed arrays of round islands, our latest approach creates BPM with rectangular bitcells, which are advantageous for integration with existing hard disk drive technology. The advantages of rectangular bits are analyzed from a theoretical and modeling point of view, and system integration requirements such as servo patterns, implementation of write synchronization, and providing for a stable head-disk interface are addressed in the context of experimental results. Optimization of magnetic alloy materials for thermal stability, writeability, and switching field distribution is discussed, and a new method for growing BPM islands on a patterned template is presented. New recording results at $1.6 Td/in^2$ (teradot/inch${}^2$, roughly equivalent to $1.3 Tb/in^2$) demonstrate a raw error rate $<10^{-2}$, which is consistent with the recording system requirements of modern hard drives. Extendibility of BPM to higher densities, and its eventual combination with energy assisted recording are explored.
We investigate the switching field distribution and the resulting bit error rate of exchange coupled ferri-/ferromagnetic bilayer island arrays by micromagnetic simulations. Using islands with varying microstructure and anisotropic properties, the in trinsic switching field distribution is computed. The dipolar contribution to the switching field distribution is obtained separately by using a model of a triangular patterned island array resembling $1.4,mathrm{Tb/in}^2$ bit patterned media. Both contributions are computed for different thickness of the soft exchange coupled ferrimagnet and also for ferromagnetic single phase FePt islands. A bit patterned media with a bilayer structure of FeGd($5,mathrm{nm}$)/FePt($5,mathrm{nm}$) shows a bit error rate of $10^{-4}$ with a write field of $1.16,mathrm{T}$.
194 - En Yang , Zuwei Liu , Hitesh Arora 2016
We present a method for growing bit patterned magnetic recording media using directed growth of sputtered granular perpendicular magnetic recording media. The grain nucleation is templated using an epitaxial seed layer which contains Pt pillars separ ated by amorphous metal oxide. The scheme enables the creation of both templated data and servo regions suitable for high density hard disk drive operation. We illustrate the importance of using a process that is both topographically and chemically driven to achieve high quality media.
Enhancing light absorption in the recording media layer can improve the energy efficiency and prolong the device lifetime in heat assisted magnetic recording (HAMR). In this work, we report the design and implementation of a resonant nanocavity struc ture to enhance the light-matter interaction within an ultrathin FePt layer. In a Ag/SiO2/FePt trilayer structure, the thickness of the dielectric SiO2 layer is systematically tuned to reach maximum light absorption at the wavelength of 830 nm. In the optimized structure, the light reflection is reduced by more than 50%. This results in effective laser heating of the FePt layer, as imaged by an infrared camera. The scheme is highly scalable for thinner FePt layers and shorter wavelengths to be used in future HAMR technologies.
التعليقات
جاري جلب التعليقات جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
mircosoft-partner

هل ترغب بارسال اشعارات عن اخر التحديثات في شمرا-اكاديميا