اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدA high flux source of cold strontium atoms
166
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
We describe an experimental apparatus capable of achieving a high loading rate of strontium atoms in a magneto-optical trap operating in a high vacuum environment. A key innovation of this setup is a two dimensional magneto-optical trap deflector located after a Zeeman slower. We find a loading rate of 6x10^9/s whereas the lifetime of the magnetically trapped atoms in the 3P2 state is 54s.
قيم البحث
اقرأ أيضاً
We present a compact source of cold sodium atoms suitable for the production of quantum degenerate gases and versatile for a multi-species experiment. The magnetic field produced by permanent magnets allows to simultaneously realize a Zeeman slower a
nd a two-dimensional MOT within an order of magnitude smaller length than standard sodium sources. We achieve an atomic flux exceeding 4x10^9 atoms/s loaded in a MOT, with a most probable longitudinal velocity of 20 m/s, and a brightness larger than 2.5x10^(12) atoms/s/sr. This atomic source allowed us to produce a pure BEC with more than 10^7 atoms and a background pressure limited lifetime of 5 minutes.
We present a high-flux source of cold ytterbium atoms that is robust, lightweight and low-maintenance. Our apparatus delivers $10^9$ atoms/s into a 3D magneto-optical trap without requiring water-cooling or high current power supplies. We achieve thi
s by employing a Zeeman slower and a 2D magneto-optical trap fully based on permanent magnets in Halbach configurations. This strategy minimizes mechanical complexity, stray magnetic fields, and heat production while requiring little to no maintenance, making it applicable to both embedded systems that seek to minimize electrical power consumption, and large scale experiments to reduce the complexity of their subsystems.
We demonstrate a novel 2D MOT beam source for cold 6Li atoms. The source is side-loaded from an oven operated at temperatures in the range 600<T<700 K. The performance is analyzed by loading the atoms into a 3D MOT located 220 mm downstream from the
source. The maximum recapture rate of ~10^9 /s is obtained for T=700 K and results in a total of up to 10^10 trapped atoms. The recaptured fraction is estimated to be 30(10)% and limited by beam divergence. The most-probable velocity in the beam (alpha_z) is varied from 18 to 70 m/s by increasing the intensity of a push beam. The source is quite monochromatic with a full-width at half maximum velocity spread of 11 m/s at alpha_z=36 m/s, demonstrating that side-loading completely eliminates beam contamination by hot vapor from the oven. We identify depletion of the low-velocity tail of the oven flux as the limiting loss mechanism. Our approach is suitable for other atomic species.
We present an experimental realization of a moving magnetic trap decelerator, where paramagnetic particles entrained in a cold supersonic beam are decelerated in a co-moving magnetic trap. Our method allows for an efficient slowing of both paramagnet
ic atoms and molecules to near stopping velocities. We show that under realistic conditions we will be able to trap and decelerate a large fraction of the initial supersonic beam. We present our first results on deceleration in a moving magnetic trap by bringing metastable neon atoms to near rest. Our estimated phase space volume occupied by decelerated particles at final velocity of 50 m/s shows an improvement of two orders of magnitude as compared to currently available deceleration techniques.
Laser cooled atoms are central to modern precision measurements. They are also increasingly important as an enabling technology for experimental cavity quantum electrodynamics, quantum information processing and matter wave interferometry. Although s
ignificant progress has been made in miniaturising atomic metrological devices, these are limited in accuracy by their use of hot atomic ensembles and buffer gases. Advances have also been made in producing portable apparatus that benefit from the advantages of atoms in the microKelvin regime. However, simplifying atomic cooling and loading using microfabrication technology has proved difficult. In this letter we address this problem, realising an atom chip that enables the integration of laser cooling and trapping into a compact apparatus. Our source delivers ten thousand times more atoms than previous magneto-optical traps with microfabricated optics and, for the first time, can reach sub-Doppler temperatures. Moreover, the same chip design offers a simple way to form stable optical lattices. These features, combined with the simplicity of fabrication and the ease of operation, make these new traps a key advance in the development of cold-atom technology for high-accuracy, portable measurement devices.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
