اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدUsing software spectrometer to ensure VLBI signal chain reliability
135
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
Software spectrometer (SWSpec) developed for spacecraft tracking can be used to assure VLBI signal chain reliability, and phase stability of a VLBI receiver. Testing performed with SWSpec during pre-operations both saves time, and eases the tests as one does not need to gather, couple and setup the hardware.
قيم البحث
اقرأ أيضاً
We have developed a software-based polarization spectrometer, PolariS, to acquire full-Stokes spectra with a very high spectral resolution of 61 Hz. The primary aim of PolariS is to measure the magnetic fields in dense star-forming cores by detecting
the Zeeman splitting of molecular emission lines. The spectrometer consists of a commercially available digital sampler and a Linux computer. The computer is equipped with a graphics processing unit (GPU) to process FFT and cross-correlation using the CUDA (Compute Unified Device Architecture) library developed by NVIDIA. Thanks to a high degree of precision in quantization of the analog-to-digital converter and arithmetic in the GPU, PolariS offers excellent performances in linearity, dynamic range, sensitivity, bandpass flatness and stability. The software has been released under the MIT License and is available to the public. In this paper, we report the design of PolariS and its performance verified through engineering tests and commissioning observations.
We describe a simple method to determine the reliability of source finders based on the detection of sources with both positive and negative total flux. Under the assumption that the noise is symmetric and that real sources have positive total flux,
negative detections can be used to assign to each positive detection a probability of being real. We discuss this method in the context of upcoming, interferometric HI surveys.
In the era of revolution, the development of softwares are increasing daily. The quality of software impacts the most in software development. To ensure the quality of the software it needs to be reviewed and updated. The effectiveness of the code re
view is that it ensures the quality of software and makes it updated. Code review is the best process that helps the developers to develop a system errorless. This report contains two different code review papers to be evaluated and find the influences that can affect the code reviewing process. The reader can easily understand the factor of the code review process which is directly associated with software quality assurance.
A possible method for linking the optical Gaia Celestial Reference Frame (GCRF) to the VLBI-based International Celestial Reference Frame (ICRF) is to use radio stars in a manner similar to that in the linking of the Hipparcos Celestial Reference Fra
me (HCRF) to ICRF. In this work, an obtainable accuracy of the orientation angles between GCRF and ICRF frames was estimated by Monte Carlo simulation. If the uncertainties in the radio star positions obtained by VLBI are in the range of 0.1-4 mas and those obtained by Gaia are in the range of 0.005-0.4 mas, the orientation angle uncertainties are 0.018-0.72 mas if 46 radio stars are used, 0.013-0.51 mas if 92 radio stars are used, and 0.010-0.41~mas if 138 radio stars are used. The general conclusion from this study is that a properly organized VLBI programme for radio star observation with a reasonable load on the VLBI network can allow for the realization of GCRF-ICRF link with an error of about 0.1 mas.
The LOw-Frequency ARray (LOFAR) is used to make precise measurements of radio emission from extensive air showers, yielding information about the primary cosmic ray. Interpreting the measured data requires an absolute and frequency-dependent calibrat
ion of the LOFAR system response. This is particularly important for spectral analyses, because the shape of the detected signal holds information about the shower development. We revisit the calibration of the LOFAR antennas in the range of 30 - 80 MHz. Using the Galactic emission and a detailed model of the LOFAR signal chain, we find an improved calibration that provides an absolute energy scale and allows for the study of frequency-dependent features in measured signals. With the new calibration, systematic uncertainties of 13% are reached, and comparisons of the spectral shape of calibrated data with simulations show promising agreement.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
