اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدFacetted growth of Fe3Si shells around GaAs nanowires on Si(111)
185
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
GaAs nanowires and GaAs/Fe3Si core/shell nanowire structures were grown by molecular-beam epitaxy on oxidized Si(111) substrates and characterized by transmission electron microscopy. The surfaces of the original GaAs NWs are completely covered by magnetic Fe3Si exhibiting nanofacets and an enhanced surface roughness compared to the bare GaAs NWs. Shell growth at a substrate temperature of T{S} = 200 {deg}C leads to regular nanofacetted Fe3Si shells. These facets, which lead to thickness inhomogeneities of the shells, consist mainly of well pronounced Fe3Si(111) planes. The crystallographic orientation of core and shell coincide, i.e. they are pseudomorphic. The nanofacetted Fe3Si shells found in the present work are probably the result of the Vollmer-Weber island growth mode of Fe3Si on the {110} side facets of the GaAs NWs.
قيم البحث
اقرأ أيضاً
The incubation time preceding nucleation and growth of surface nanostructures is interesting from a fundamental viewpoint but also of practical relevance as it determines statistical properties of nanostructure ensembles such as size homogeneity. Usi
ng in situ reflection high-energy electron diffraction, we accurately deduce the incubation times for Ga-assisted GaAs nanowires grown on unpatterned Si(111) substrates by molecular beam epitaxy under different conditions. We develop a nucleation model that explains and fits very well the data. We find that, for a given temperature and Ga flux, the incubation time always increases with decreasing As flux and becomes infinite at a certain minimum flux, which is larger for higher temperature. For given As and Ga fluxes, the incubation time always increases with temperature and rapidly tends to infinity above 640 {deg}C under typical conditions. The strong temperature dependence of the incubation time is reflected in a similar variation of the nanowire number density with temperature. Our analysis provides understanding and guidance for choosing appropriate growth conditions that avoid unnecessary material consumption, long nucleation delays, and highly inhomogeneous ensembles of nanowires. On a more general ground, the existence of a minimum flux and maximum temperature for growing surface nanostructures should be a general phenomenon pertaining for a wide range of material-substrate combinations.
GaAs nanowires and GaAs-Fe3Si core-shell nanowire structures were grown by molecular-beam epitaxy on oxidized Si(111) substrates and characterized by transmission electron microscopy (TEM) and X-ray diffraction (XRD). Ga droplets were formed on the o
xide surface, and the semiconducting GaAs nanowires grew epitaxially via the vapor-liquid-solid mechanism as single-crystals from holes in the oxide film. We observed two stages of growth of the GaAs nanowires, first the regular growth and second the residual growth after the Ga supply was finished. The magnetic Fe3Si shells were deposited in an As-free chamber. They completely cover the GaAs cores although they consist of small grains. High-resolution TEM micrographs depict the differently oriented grains in the Fe3Si shells. Selected area diffraction of electrons and XRD gave further evidence that the shells are textured and not single crystals. Facetting of the shells was observed, which lead to thickness inhomogeneities of the shells.
Fe3Si/Al/Fe3Si/GaAs(001) structures were deposited by molecular-beam epitaxy and characterized by transmission and scanning electron microscopy, and x-ray diffraction. The first Fe3Si film on GaAs(001) is growing epitaxially as (001) oriented single
crystal. The subsequent Al film grows almost 111 oriented in a fibre texture although the underlying Fe3Si is exactly (001) oriented. The growth in this orientation is triggered by a thin transition region which is formed at the Fe3Si/Al interface. In the end after the growth of the second Fe3Si layer on top of the Al the final properties of the whole stack depend on the substrate temperature T_S during deposition of the last film. The upper Fe3Si films are mainly 110 oriented although they are poly-crystalline. At lower T_S, around room temperature, all the films retain their original structural properties.
In this work we show that the incidence angle of group-III elements fluxes plays a significant role on the diffusion-controlled growth of III-V nanowires (NWs) by molecular beam epitaxy (MBE). We present a thorough experimental study on the self-assi
sted growth of GaAs NWs by using a MBE reactor equipped with two Ga cells located at different incidence angles with respect to the surface normal of the substrate, so as to ascertain the impact of such a parameter on the NW growth kinetics. The as-obtained results show a dramatic influence of the Ga flux incidence angle on the NW length and diameter, as well as on the shape and size of the Ga droplets acting as catalysts. In order to interpret the results we developed a semi-empirical analytic model inspired by those already developed for MBE-grown Au-catalyzed GaAs NWs. Numerical simulations performed with the model allow to reproduce thoroughly the experimental results (in terms of NW length and diameter and of droplet size and wetting angle), putting in evidence that under formally the same experimental conditions the incidence angle of the Ga flux is a key parameter which can drastically affect the growth kinetics of the NWs grown by MBE.
A procedure to achieve the density-controlled growth of gold-catalyzed InP nanowires (NWs) on (111) silicon substrates using the vapor-liquid-solid method by molecular beam epitaxy is reported. We develop an effective and mask-free method based on co
ntrolling the number and the size of the Au-In catalyst droplets in addition to the conditions for the NW nucleation. We show that the NW density can be tuned with values in the range of 18 {mu}m-2 to < 0.1 {mu}m-2 by the suitable choice of the In/Au catalyst beam equivalent pressure (BEP) ratio, by the phosphorous BEP and the growth temperature. The same degree of control is transferred to InAs/InP quantum dot-nanowires, taking advantage of the ultra-low density to study by micro-photoluminescence the optical properties of a single quantum dot-nanowires emitting in the telecom band monolithically grown on silicon. Optical spectroscopy at cryogenic temperature successfully confirmed the relevance of our method to excite single InAs quantum dots on the as-grown sample, which opens the path for large-scale applications based on single quantum dot-nanowire devices integrated on silicon.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
