اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدThickness Scaling Effect on Interfacial Barrier and Electrical Contact to Two-Dimensional MoS2 Layers
138
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
Understanding the interfacial electrical properties between metallic electrodes and low dimensional semiconductors is essential for both fundamental science and practical applications. Here we report the observation of thickness reduction induced crossover of electrical contact at Au/MoS2 interfaces. For MoS2 thicker than 5 layers, the contact resistivity slightly decreases with reducing MoS2 thickness. By contrast, the contact resistivity sharply increases with reducing MoS2 thickness below 5 layers, mainly governed by the quantum confinement effect. It is found that the interfacial potential barrier can be finely tailored from 0.3 to 0.6 eV by merely varying MoS2 thickness. A full evolution diagram of energy level alignment is also drawn to elucidate the thickness scaling effect. The finding of tailoring interfacial properties with channel thickness represents a useful approach controlling the metal/semiconductor interfaces which may result in conceptually innovative functionalities.
قيم البحث
اقرأ أيضاً
Transition metal dichalcogenides (TMDs) are layered semiconducting van der Waal crystals and promising materials for a wide range of electronic and optoelectronic devices. Realizing practical electrical and optoelectronic device applications requires
a connection between a metal junction and a TMD semiconductor. Hence, a complete understanding of electronic band alignments and the potential barrier heights governing the transport through a metal-TMD-metal junction is critical. But, there is a knowledge gap; it is not clear how the energy bands of a TMD align while in contact with a metal as a function of the number of layers. In pursuit of removing this knowledge gap, we have performed conductive atomic force microscopy (CAFM) of few layered (1-5) MoS2 immobilized on ultra-flat conducting Au surfaces (root mean square (RMS) surface roughness <0.2 nm) and indium tin oxide (ITO) substrate (RMS surface roughness <0.7 nm) forming a vertical metal (conductive-AFM tip)-semiconductor-metal device. We have observed that the current increases as the number of layers increases up to 5 layers. By applying Fowler-Nordheim tunneling theory, we have determined the barrier heights for different layers and observed that the barrier height decreases as the number of layers increases. Using density functional theory (DFT) calculation, we successfully demonstrated that the barrier height decreases as the layer number increases. By illuminating the TMDs on a transparent ultra-flat conducting ITO substrate, we observed a reduction in current when compared to the current measured in the dark, hence demonstrating negative photoconductivity. Our study provides a fundamental understanding of the local electronic and optoelectronic behaviors of TMD-metal junction, and may pave an avenue toward developing nanoscale electronic devices with tailored layer-dependent transport properties.
The successful isolation of graphene ten years ago has evoked a rapidly growing scientific interest in the nature of two-dimensional (2D) crystals. A number of different 2D crystals has been produced since then, with properties ranging from supercond
uctivity to insulating behavior. Here, we predict the possibility for realizing ferromagnetic 2D crystals by exfoliating atomically thin films of K2CuF4. From a first-principles theoretical analysis, we find that single layers of K2CuF4 form exactly 2D Kosterlitz-Thouless systems. The 2D crystal can form a free-standing membrane, and exhibits an experimentally accessible transition temperature and robust magnetic moments of 1 Bohr magneton per formula unit. 2D K2CuF4 unites ferromagnetic and insulating properties and is a demonstration of principles for nanoelectronics such as novel 2D-based heterostructures.
Local magnetic impurities arising from atomic vacancies in two-dimensional (2D) nanosheets are predicted to have a profound effect on charge transport due to resonant scattering, and provide a handle for enhancing thermoelectric properties through th
e Kondo effect. However, the effects of these impurities are often masked by external fluctuations and turbostratic interfaces, therefore, it is highly challenging to probe the correlation between magnetic impurities and thermoelectric parameters experimentally. In this work, we demonstrate that by placing Molybdenum Disulfide on a hexagonal Boron Nitride substrate, a colossal spin splitting of the conduction sub-band up to ~50.0 meV is observed at the sulfur vacancies, suggesting that these are local magnetic states. Transport measurements reveal a large anomalous positive Seebeck coefficient in highly conducting n type MoS2, originating from quasiparticle resonance near the Fermi level described by the Kondo effect. Furthermore, by tuning the chemical potential, a record power factor of 50mW/mK2 in low-dimensional materials was achieved. Our work shows that defect engineering of 2D materials affords a strategy for controlling Kondo impurities and tuning thermoelectric transport.
The two-dimensional (2D) layered semiconductors such as MoS2 have attracted tremendous interest as a new class of electronic materials. However, there is considerable challenge in making reliable contacts to these atomically thin materials. Here we p
resent a new strategy by using graphene as back electrodes to achieve Ohmic contact to MoS2. With a finite density of states, the Fermi level of graphene can be readily modified by gate potential to ensure a nearly perfect band alignment with MoS2. We demonstrate, for the first time, a transparent contact can be made to MoS2 with essentially zero contact barrier and linear output behaviour at cryogenic temperatures (down to 1.9 K) for both monolayer and multilayer MoS2. Benefiting from the barrier-free transparent contacts, we show that a metal-insulator-transition (MIT) can be observed in a two-terminal MoS2 device, a phenomenon that could be easily masked by Schottky barrier and only seen in four-terminal devices in conventional metal-contacted MoS2 system. With further passivation y born nitride encapsulation, we demonstrate a record high extrinsic (two-terminal) field effect mobility over 1300 cm2/Vs in MoS2.
Establishing ohmic contact to van der Waals semiconductors such as MoS2 is crucial to unlocking their full potential in next-generation electronic devices. Encapsulation of few layer MoS2 with hBN preserves the materials electronic properties but mak
es electrical contacts more challenging. Progress toward high quality edge contact to encapsulated MoS2 has been recently reported. Here, we evaluate a contact methodology using sputtered MoRe, a Type II superconductor with a relatively high critical field and temperature commonly used to induce superconductivity in graphene. We find that the contact transparency is poor and that the devices do not support a measurable supercurrent down to 3 Kelvin, which has ramifications for future fabrication recipes.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
