اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدMacro- and microscopic properties of strontium doped indium oxide
357
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
Solid state synthesis and physical mechanisms of electrical conductivity variation in polycrystalline, strontium doped indium oxide In2O3:(SrO)x were investigated for materials with different doping levels at different temperatures (T=20-300 C) and ambient atmosphere content including humidity and low pressure. Gas sensing ability of these compounds as well as the sample resistance appeared to increase by 4 and 8 orders of the magnitude, respectively, with the doping level increase from zero up to x=10%. The conductance variation due to doping is explained by two mechanisms: acceptor-like electrical activity of Sr as a point defect and appearance of an additional phase of SrIn2O4. An unusual property of high level (x=10%) doped samples is a possibility of extraordinarily large and fast oxygen exchange with ambient atmosphere at not very high temperatures (100-200 C). This peculiarity is explained by friable structure of crystallite surface. Friable structure provides relatively fast transition of samples from high to low resistive state at the expense of high conductance of the near surface layer of the grains. Microscopic study of the electro-diffusion process at the surface of oxygen deficient samples allowed estimation of the diffusion coefficient of oxygen vacancies in the friable surface layer at room temperature as 3x10^(-13) cm^2/s, which is by one order of the magnitude smaller than that known for amorphous indium oxide films.
قيم البحث
اقرأ أيضاً
The recent discovery of excellent thermoelectric properties and topological surface states in SnTe-based compounds has attracted extensive attention in various research areas. Indium doped SnTe is of particular interest because, depending on the dopi
ng level, it can either generate resonant states in the bulk valence band leading to enhanced thermoelectric properties, or induce superconductivity that coexists with topological states. Here we report on the vapor deposition of In-doped SnTe nanowires and the study of their surface oxidation and thermoelectric properties. The nanowire growth is assisted by Au catalysts, and their morphologies vary as a function of substrate position and temperature. Transmission electron microscopy characterization reveals the formation of amorphous surface in single crystalline nanowires. X-ray photoelectron spectroscopy studies suggest that the nanowire surface is composed of In2O3, SnO2, Te and TeO2 which can be readily removed by argon ion sputtering. Exposure of the cleaned nanowires to atmosphere yields rapid oxidation of the surface within only one minute. Characterizations of electrical conductivity {sigma}, thermopower S, and thermal conductivity k{appa} were performed on the same In-doped nanowire which shows suppressed {sigma} and k{appa} but enhanced S yielding an improved thermoelectric figure of merit ZT than the undoped SnTe.
Tin doped indium oxide (ITO) thin films are being used extensively as transparent conductors in several applications. In the present communication, we report the electrical transport in DC magnetron sputtered ITO thin films in low temperatures (25-30
0 K). The low temperature Hall effect and resistivity measurements reveal that the ITO thin films are moderately dis-ordered (kfl~1) and degenerate semiconductor. The transport of charge carriers in these disordered ITO thin films takes place via the de-localized states. The disorder effects lead to the well- known metal-insulator transition; this transition is observed at 110 K in ITO thin films. The metal-insulator behaviour is explained by the quantum correction to the conductivity (QCC); this approach is based on the quantum-mechanical interference effects in the disordered systems. The insulating behaviour is attributed to the combined effect of the weak localization and the electron-electron interactions.
Room-temperature metallicity of lightly doped SrTiO$_3$ is puzzling, because the combination of mobility and the effective mass would imply a mean-free-path (mfp) below the Mott Ioffe Regel (MIR) limit and a scattering time shorter than the Planckian
time ($tau_P=hbar/k_BT$). We present a study of electric resistivity, Seebeck coefficient and inelastic neutron scattering extended to very high temperatures, which deepens the puzzle. Metallic resistivity persists up to 900 K and is accompanied by a large Seebeck coefficient whose magnitude (as well as its temperature and doping dependence) indicates that carriers are becoming heavier with rising temperature. Combining this with neutron scattering data, we find that between 500 K and 900 K, the Bohr radius and the electron wave-length become comparable to each other and twice the lattice parameter. According to our results, between 100 K and 500 K, metallicity is partially driven by temperature-induced amplification of the carrier mass. We contrast this mass amplification of non-degenerate electrons with the better-known case of heavy degenerate electrons. Above 500 K, the mean-free-path continues to shrink with warming in spite of becoming shorter than both the interatomic distance and the thermal wavelength of the electrons. The latter saturates to twice the lattice parameter. Available theories of polaronic quasi-particles do not provide satisfactory explanation for our observations.
84 -
N.I. Matskevich (Nikolaev Institute of Inorganic Chemistry
, Siberiann Branch of the Russian Academy of Sciences
, Novosibirsk
2005
The standard molar enthalpy of formation of SrY0.05Ce0.95O2.975 has been derived by combining the enthalpy of solution of this compound in 1 M HCl + 0.1 KI obtained by us and auxiliary literature data. The following value has been derived: DfH (SrY0.
05Ce0.95O2.975, s, 298.15 K) = -1720.4 (3.4) kJ/mol. The obtained value has been used to obtain the formation enthalpy of SrY0.05Ce0.95O2.975 from the mixture of binary oxides (DoxH (298.15 K) = -45.9 (3.4) kJ/mol) and formation enthalpy of reaction of SrY0.05Ce0.95O2.975 with water forming Sr(OH)2, CeO2, Y2O3 (DrH (298.15 K) = -85.5 (3.4) kJ/mol). Data obtained by solution calorimetry and additional information on the entropies of different substances have shown that SrY0.05Ce0.95O2.975 is thermodynamically stable with respect to a mixture of SrO, Y2O3, CeO2 and that the reaction of SrY0.05Ce0.95O2.975 with water is thermodynamically favourable.
The dissolution enthalpies of BaCe0.7Ho0.2In0.1O2.85 and BaCe0.7Sm0.2In0.1O2.85 were measured by method of solution calorimetry in 1M hydrochloric acid with adding 0.1 M KI. The obtained data were compared with earlier measured data on dissolution en
thalpies of BaCe0.7Nd0.2In0.1O2.85, BaCe0.7Gd0.2In0.1O2.85. The dependence of dissolution enthalpies from lanthanide radius was constructed. As was shown the relationship is not linear.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
