اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدFormation of a Flare-Productive Active Region: Observation and Numerical Simulation of NOAA AR 11158
136
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
We present a comparison of the Solar Dynamics Observatory (SDO) analysis of NOAA Active Region (AR) 11158 and numerical simulations of flux-tube emergence, aiming to investigate the formation process of this flare-productive AR. First, we use SDO/Helioseismic and Magnetic Imager (HMI) magnetograms to investigate the photospheric evolution and Atmospheric Imaging Assembly (AIA) data to analyze the relevant coronal structures. Key features of this quadrupolar region are a long sheared polarity inversion line (PIL) in the central delta-sunspots and a coronal arcade above the PIL. We find that these features are responsible for the production of intense flares, including an X2.2-class event. Based on the observations, we then propose two possible models for the creation of AR 11158 and conduct flux-emergence simulations of the two cases to reproduce this AR. Case 1 is the emergence of a single flux tube, which is split into two in the convection zone and emerges at two locations, while Case 2 is the emergence of two isolated but neighboring tubes. We find that, in Case 1, a sheared PIL and a coronal arcade are created in the middle of the region, which agrees with the AR 11158 observation. However, Case 2 never builds a clear PIL, which deviates from the observation. Therefore, we conclude that the flare-productive AR 11158 is, between the two cases, more likely to be created from a single split emerging flux than from two independent flux bundles.
قيم البحث
اقرأ أيضاً
We report a detailed event analysis on the M6.6-class flare in the active region (AR) NOAA 11158 on 2011 February 13. AR 11158, which consisted of two major emerging bipoles, showed prominent activities including one X- and several M-class flares. In
order to investigate the magnetic structures related to the M6.6 event, particularly the formation process of a flare-triggering magnetic region, we analyzed multiple spacecraft observations and numerical results of a flare simulation. We observed that, in the center of this quadrupolar AR, a highly sheared polarity inversion line (PIL) was formed through proper motions of the major magnetic elements, which built a sheared coronal arcade lying over the PIL. The observations lend support to the interpretation that the target flare was triggered by a localized magnetic region that had an intrusive structure, namely a positive polarity penetrating into a negative counterpart. The geometrical relationship between the sheared coronal arcade and the triggering region was consistent with the theoretical flare model based on the previous numerical study. We found that the formation of the trigger region was due to a continuous accumulation of the small-scale magnetic patches. A few hours before the flare occurrence, the series of emerged/advected patches reconnected with a preexisting fields. Finally, the abrupt flare eruption of the M6.6 event started around 17:30 UT. Our analysis suggests that, in a triggering process of a flare activity, all magnetic systems of multiple scales, not only the entire AR evolution but also the fine magnetic elements, are altogether involved.
Solar Active Region NOAA 11158 has hosted a number of strong flares, including one X2.2 event. The complexity of current density and current helicity are studied through cancellation analysis of their sign-singular measure, which features power-law s
caling. Spectral analysis is also performed, revealing the presence of two separate scaling ranges with different spectral index. The time evolution of parameters is discussed. Sudden changes of the cancellation exponents at the time of large flares, and the presence of correlation with EUV and X-ray flux, suggest that eruption of large flares can be linked to the small scale properties of the current structures.
The NOAA active region AR 11029 was a small but highly active sunspot region which produced 73 GOES soft X-ray flares. The flares appear to show a departure from the well known power-law frequency-size distribution. Specifically, too few GOES C-class
and no M-class flares were observed by comparison with a power-law distribution (Wheatland in Astrophys. J. 710, 1324, 2010). This was conjectured to be due to the region having insufficient magnetic energy to power large events. We construct nonlinear force-free extrapolations of the coronal magnetic field of active region AR 11029 using data taken on 24 October by the SOLIS Vector-SpectroMagnetograph (SOLIS/VSM), and data taken on 27 October by the Hinode Solar Optical Telescope SpectroPolarimeter (Hinode/SP). Force-free modeling with photospheric magnetogram data encounters problems because the magnetogram data are inconsistent with a force-free model, and we employ a recently developed `self-consistency procedure which addresses this and accommodates uncertainties in the boundary data (Wheatland and Regnier in Astrophys. J. 700, L88, 2009). We calculate the total energy and free energy of the self-consistent solution and find that the free energy was 4x10^29 erg on 24 October, and 7x10^31 erg on 27 October. An order of magnitude scaling between RHESSI non-thermal energy and GOES peak X-ray flux is established from a sample of flares from the literature and is used to estimate flare energies from observed GOES peak X-ray flux. Based on the scaling, we conclude that the estimated free energy of AR 11029 on 27 October when the flaring rate peaked is sufficient to power M-class or X-class flares, and hence the modeling does not appear to support the hypothesis that the absence of large flares is due to the region having limited energy.
In this work we study how the input data cadence affects the photospheric energy and helicity injection estimates in eruptive NOAA active region 11158. We sample the novel 2.25-minute vector magnetogram and Dopplergram data from the emph{Helioseismic
and Magnetic Imager} (HMI) instrument onboard the emph{Solar Dynamics Observatory} (SDO) spacecraft to create input datasets of variable cadences ranging from 2.25 minutes to 24 hours. We employ state-of-the-art data processing, velocity and electric field inversion methods for deriving estimates of the energy and helicity injections from these datasets. We find that the electric field inversion methods that reproduce the observed magnetic field evolution through the use of Faradays law are more stable against variable cadence: the PDFI (PTD-Doppler-FLCT-Ideal) electric field inversion method produces consistent injection estimates for cadences from 2.25 minutes up to 2 hours, implying that the photospheric processes acting on time scales below 2 hours contribute little to the injections, or that they are below the sensitivity of the input data and the PDFI method. On other hand, the electric field estimate derived from the output of DAVE4VM (Differential Affine Velocity Estimator for Vector Magnetograms), which does not fulfil Faradays law exactly, produces significant variations in the energy and helicity injection estimates in the 2.25-minute to 2-hour cadence range. We present also a third, novel DAVE4VM-based electric field estimate, which corrects the poor inductivity of the raw DAVE4VM estimate. This method is less sensitive to the changes of cadence, but still faces significant issues for the lowest of considered cadences ($geq$2 hours). We find several potential problems in both PDFI- and DAVE4VM-based injection estimates and conclude that the quality of both should be surveyed further in controlled environments.
How much electromagnetic energy crosses the photosphere in evolving solar active regions? With the advent of high-cadence vector magnetic field observations, addressing this fundamental question has become tractable. In this paper, we apply the PTD-D
oppler-FLCT-Ideal (PDFI) electric field inversion technique of Kazachenko et al. (2014) to a 6-day HMI/SDO vector magnetogram and Doppler velocity sequence, to find the electric field and Poynting flux evolution in active region NOAA 11158, which produced an X2.2 flare early on 2011 February 15. We find photospheric electric fields ranging up to $2$ V/cm. The Poynting fluxes range from $[-0.6$ to $2.3]times10^{10}$ ergs$cdot$cm$^{-2}$s$^{-1}$, mostly positive, with the largest contribution to the energy budget in the range of $[10^9$-$10^{10}]$ ergs$cdot$cm$^{-2}$s$^{-1}$. Integrating the instantaneous energy flux over space and time, we find that the total magnetic energy accumulated above the photosphere from the initial emergence to the moment before the X2.2 flare to be $E=10.6times10^{32}$ ergs, which is partitioned as $2.0$ and $8.6times10^{32}$ ergs, respectively, between free and potential energies. Those estimates are consistent with estimates from preflare non-linear force-free field (NLFFF) extrapolations and the Minimum Current Corona estimates (MCC), in spite of our very different approach. This study of photospheric electric fields demonstrates the potential of the PDFI approach for estimating Poynting fluxes and opens the door to more quantitative studies of the solar photosphere and more realistic data-driven simulations of coronal magnetic field evolution.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
