اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدAn Alternative Accurate Tracer of Molecular Clouds: The $X_{rm CI}$-Factor
134
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
We explore the utility of CI as an alternative high-fidelity gas mass tracer for Galactic molecular clouds. We evaluate the X$_{rm CI}$-factor for the 609 $mu$m carbon line, the analog of the CO X-factor, which is the ratio of the H$_2$ column density to the integrated $^{12}$CO(1-0) line intensity. We use 3D-PDR to post-process hydrodynamic simulations of turbulent, star-forming clouds. We compare the emission of CI and CO for model clouds irradiated by 1 and 10 times the average background and demonstrate that CI is a comparable or superior tracer of the molecular gas distribution for column densities up to $6 times 10^{23}$ cm$^{-2}$. Our results hold for both reduced and full chemical networks. For our fiducial Galactic cloud we derive an average $X_{rm CO}$ of $3.0times 10^{20}$ cm$^{-2}$K$^{-1}$km$^{-1}$s and $X_{rm CI}$ of $1.1times 10^{21}$ cm$^{-2}$K$^{-1}$km$^{-1}$s.
قيم البحث
اقرأ أيضاً
In this work we conclude the analysis of our CO line survey of Luminous Infrared Galaxies (LIRGs: L_{IR}>=10^{11}L_{sol}) in the local Universe (Paper,I), by focusing on the influence of their average ISM properties on the total molecular gas mass es
timates via the so-called X_{co}=M(H_2)/L_{co,1-0} factor. One-phase radiative transfer models of the global CO Spectral Line Energy Distributions (SLEDs) yield an X_{co} distribution with: <X_{co}>sim(0.6+/-0.2) M_{sol}(K km s^{-1} pc^2)^{-1} over a significant range of average gas densities, temperatures and dynamical states. The latter emerges as the most important parameter in determining X_{co}, with unbound states yielding low values and self-gravitating states the highest ones. Nevertheless in many (U)LIRGs where available higher-J CO lines (J=3--2, 4--3, and/or J=6--5) or HCN line data from the literature allow a separate assessment of the gas mass at high densities (>=10^{4} cm^{-3}) rather than a simple one-phase analysis we find that {it near-Galactic X_{co} (3-6), M_sol,(K,km^{-1},pc^2)^{-1} values become possible.} We further show that in the highly turbulent molecular gas in ULIRGs a high-density component will be common and can be massive enough for its high X_{co} to dominate the average value for the entire galaxy. ......... ...this may have thus resulted to systematic underestimates of molecular gas mass in ULIRGs.
We investigate the spectral correlations between different species used to observe molecular clouds. We use hydrodynamic simulations and a full chemical network to study the abundances of over 150 species in typical Milky Way molecular clouds. We per
form synthetic observations in order to produce emission maps of a subset of these tracers. We study the effects of different lines of sight and spatial resolution on the emission distribution and perform a robust quantitative comparison of the species to each other. We use the Spectral Correlation Function (SCF), which quantifies the root mean squared difference between spectra separated by some length scale, to characterize the structure of the simulated cloud in position-position-velocity (PPV) space. We predict the observed SCF for a broad range of observational tracers, and thus, identify homologous species. In particular, we show that the pairs C and CO, C$^{+}$ and CN, NH$_3$ and H$_2$CS have very similar SCFs. We measure the SCF slope variation as a function of beam size for all species and demonstrate that the beam size has a distinct effect on different species emission. However, for beams of up to 10, placing the cloud at 1 kpc, the change is not large enough to move the SCF slopes into different regions of parameter space. The results from this study provide observational guidance for choosing the best tracer to probe various cloud length scales.
Atoms and molecules, and in particular CO, are important coolants during the evolution of interstellar star-forming gas clouds. The presence of dust grains, which allow many chemical reactions to occur on their surfaces, strongly impacts the chemical
composition of a cloud. At low temperatures, dust grains can lock-up species from the gas phase which freeze out and form ices. In this sense, dust can deplete important coolants. Our aim is to understand the effects of freeze-out on the thermal balance and the evolution of a gravitationally bound molecular cloud. For this purpose, we perform 3D hydrodynamical simulations with the adaptive mesh code FLASH. We simulate a gravitationally unstable cloud under two different conditions, with and without grain surface chemistry. We let the cloud evolve until one free-fall time is reached and track the thermal evolution and the abundances of species during this time. We see that at a number density of 10$^4$ cm$^{-3}$ most of the CO molecules are frozen on dust grains in the run with grain surface chemistry, thereby depriving the most important coolant. As a consequence, we find that the temperature of the gas rises up to $sim$25 K. The temperature drops once again due to gas-grain collisional cooling when the density reaches a few$times$10$^4$ cm$^{-3}$. We conclude that grain surface chemistry not only affects the chemical abundances in the gas phase, but also leaves a distinct imprint in the thermal evolution that impacts the fragmentation of a star-forming cloud. As a final step, we present the equation of state of a collapsing molecular cloud that has grain surface chemistry included.
Aims. We seek to understand how the 4.8 GHz formaldehyde absorption line is distributed in the MON R2, S156, DR17/L906, and M17/M18 regions. More specifically, we look for the relationship among the H2CO, 12CO, and 13CO spectral lines. Methods. The f
our regions of MON R2 (60x90), S156 (50x70), DR17/L906 (40x60), and M17 /M18 (70x80)were observed for H2CO (beam 10), H110a recombination (beam 10), 6 cm continuum (beam 10), 12CO (beam 1), and 13CO (beam 1). We compared the H2CO,12CO,13CO, and continuum distributions, and also the spectra line parameters of H2CO,12CO, and 13CO. Column densities of H2CO,13CO, and H2 were also estimated. Results. We found out that the H2CO distribution is similar to the 12CO and the 13CO distributions on a large scale. The correlation between the 13 CO and the H2CO distributions is better than between the 12CO and H2CO distributions. The H2CO and the 13CO tracers systematically provide consistent views of the dense regions. T heir maps have similar shapes, sizes, peak positions, and molecular spectra and present similar centr al velocities and line widths. Such good agreement indicates that the H2CO and the 13CO arise from similar regions.
Deriving the metallicity, [Fe/H], in low-resolution spectra of carbon-enhanced metal-poor (CEMP) stars is a tedious task that, owing to the large number of line blends, often leads to uncertainties on [Fe/H] exceeding 0.25dex. The CEMP stars increase
in number with decreasing [Fe/H] and some of these are known to be bona fide second generation halo stars. Hence, knowing their [Fe/H] is important for tracing the formation and chemical evolution of the Galaxy. Here, we aim to improve the [Fe/H] measurements in low-resolution spectra by avoiding issues related to blends. We improve our chemical tagging in such spectra at low metallicities. We developed an empirical way of deriving [Fe/H] in CEMP (and C-normal) stars that relates the equivalent width (EW) of strong lines, which remain detectable in lower-resolution, metal-poor spectra. The best [Fe/H] tracers are found to be Cr I and Ni I, which both show strong transitions in spectral regions that are free of molecular bands (between ~5200-6800A, a region accessible to most surveys). We derive different relations for dwarfs and giants. The relations are valid in the ranges ~-3<[Fe/H]<-0.5 and 10<EW<800mA (Cr) or [Fe/H]>-3.2 and EW>5mA (Ni), depending on the element and line as well as the stellar evolutionary stage. The empirical relations are valid for both CEMP and C-normal stars and have been proven to be accurate tracers in a sample of ~400 stars (mainly giants). The metallicities are accurate to within ~0.2 depending on the sample and resolution, and the empirical relations are robust to within 0.05-0.1dex. Our relations will improve the metallicity determination in future surveys, which will encounter a large number of CEMP stars, and will greatly speed up the process of determining [Fe/H] as the EWs only need to be measured in two or three lines in relatively clean regions compared to dealing with numerous blended Fe lines. Abrigded.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
