اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدASTRI SST-2M Data Handling and Archiving System
150
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
The ASTRI project is the INAF (Italian National Institute for Astrophysics) flagship project developed in the context of the Cherenkov Telescope Array (CTA) international project. ASTRI is dedicated to the realization of the prototype of a Cherenkov small-size dual-mirror telescope (SST-2M) and then to the realization of a mini-array composed of a few of these units. The prototype and all the necessary hardware devices are foreseen to be installed at the Serra La Nave Observing Station (Catania, Italy) in 2014. The upcoming data flow will be properly reduced by dedicated (online and offline) analysis pipelines aimed at providing robust and reliable scientific results (signal detection, sky maps, spectra and light curves) from the ASTRI silicon photo-multipliers camera raw data. Furthermore, a flexible archiving system has being conceived for the storage of all the acquired ASTRI (scientific, calibration, housekeeping) data at different steps of the data reduction up to the final scientific products. In this contribution we present the data acquisition, the analysis pipeline and the archive architecture that will be in use for the ASTRI SST prototype. In addition, the generalization of the data management system to the case of a mini-array of ASTRI telescopes will be discussed.
قيم البحث
اقرأ أيضاً
ASTRI is a Flagship Project financed by the Italian Ministry of Education, University and Research, and led by INAF, the Italian National Institute of Astrophysics. The primary goal of the ASTRI project is the realization of an end-to-end prototype o
f a Small Size Telescope for the Cherenkov Telescope Array. The prototype, named ASTRI SST-2M, is based on a completely new double mirror optics design and will be equipped with a camera made of a matrix of SiPM detectors. Here we describe the ASTRI SST-2M camera concept: basic idea, detectors, electronics, current status and some results coming from experiments in lab.
ASTRI (Astrofisica con Specchi a Tecnologia Replicante Italiana) is an Italian flagship project pursued by INAF (Istituto Nazionale di Astrofisica) strictly linked to the development of the Cherenkov Telescope Array, CTA. Primary goal of the ASTRI pr
ogram is the design and production of an end-to-end prototype of a Small Size Telescope for the CTA sub-array devoted to the highest gamma-ray energy region. The prototype, named ASTRI SST-2M, will be tested on field in Italy during 2014. This telescope will be the first Cherenkov telescope adopting the double reflection layout in a Schwarzschild-Couder configuration with a tessellated primary mirror and a monolithic secondary mirror. The collected light will be focused on a compact and light-weight camera based on silicon photo-multipliers covering a 9.6 deg full field of view. Detailed Monte Carlo simulations have been performed to estimate the performance of the planned telescope. The results regarding its energy threshold, sensitivity and angular resolution are shown and discussed.
ASTRI is a Flagship Project financed by the Italian Ministry of Education, University and Research, and led by the Italian National Institute of Astrophysics, INAF. Primary goal of the ASTRI project is the design and production of an end-to-end proto
type of Small Size Telescope for the CTA (Cherenkov Telescope Array) in a dual-mirror configuration (SST-2M) equipped with a camera at the focal plane composed by an array of Silicon Photo-Multipliers and devoted to the investigation of the highest gamma-ray energy band. The ASTRI SST-2M prototype will be placed at the INAF M.G. Fracastoro observing station in Serra La Nave on the Etna Mountain near Catania, Italy. After the verification tests, devoted to probe the technological solutions adopted, the ASTRI SST-2M prototype will perform scientific observations on the Crab Nebula and on some of the brightest TeV sources. Here we present the Serra La Nave site, its meteorological and weather conditions, the sky darkness and visibility, and the complex of auxiliary instrumentation that will be used on site to support the calibration and science verification phase as well as the regular data reconstruction and analysis of the ASTRI SST-2M prototype.
The study of ring images generated from high-energy muons is a very useful tool for the performance monitoring and calibration of any Imaging Atmosphere Cherenkov Telescope. Isolated muons travelling towards the telescope light collector system produ
ce characteristic Cherenkov ring images in the focal plane camera. Since the geometry and the distribution of light deployed onto the camera can be easily reconstructed analytically for a muon of given energy and direction, muon rings are a powerful tool for monitoring the behaviour of crucial properties of an imaging telescope such as the point-spread-function and the overall light collection efficiency. In this contribution we present the possibility of using the analysis of muon ring images as calibrator for the ASTRI SST-2M prototype point spread function.
ASTRI is a Flagship Project of the Italian Ministry of Education, University and Research, led by the Italian National Institute of Astrophysics, INAF. One of the main aims of the ASTRI Project is the design, construction and verification on-field of
a dual mirror (2M) end-to-end prototype for the Small Size Telescope (SST) envisaged to become part of the Cherenkov Telescope Array. The ASTRI SST-2M prototype adopts the Schwarzschild-Couder design, and a camera based on SiPM (Silicon Photo Multiplier); it will be assembled at the INAF astronomical site of Serra La Nave on mount Etna (Catania, Italy) within mid 2014, and will start scientific validation phase soon after. The peculiarities of the optical design and of the SiPM bandpass pushed towards specifically optimized choices in terms of reflective coatings for both the primary and the secondary mirror. In particular, multi-layer dielectric coatings, capable of filtering out the large Night Sky Background contamination at wavelengths $lambda gtrsim 700$ nm have been developed and tested, as a solution for the primary mirrors. Due to the conformation of the ASTRI SST-2M camera, a reimaging system based on thin pyramidal light guides could be optionally integrated aiming to increase the fill factor. An anti-reflective coating optimized for a wide range of incident angles faraway from normality was specifically developed to enhance the UV-optical transparency of these elements. The issues, strategy, simulations and experimental results are thoroughly presented.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
