اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدComment on Damping Force in the Transit-time Method of Optical Stochastic Cooling
201
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
In this brief report we pointed at mistake in paper A. Zholents, Damping Force in the Transit-Time Method of Optical Stochastic Cooling, PRLST. Mar 1, 2012. 2 pp. Published in Phys.Rev.ST Accel. Beams 15 (2012) 032801.
قيم البحث
اقرأ أيضاً
Ultra-fast stochastic cooling would be desirable in certain applications, for example, in order to boost final luminosity in a muon collider or neutrino factory, where short particle lifetimes severely limit the total time available to reduce beam ph
ase space. But fast cooling requires very high-bandwidth amplifiers so as to limit the incoherent heating effects from neighboring particles. A method of transit-time optical stochastic cooling has been proposed which would employ high-gain, high-bandwidth, solid-state lasers to amplify the spontaneous radiation from the charged particle bunch in a strong-field magnetic wiggler. This amplified light is then fed back onto the same bunch inside a second wiggler, with appropriate phase delay to effect cooling. But before amplification, the usable signal from any one particle is quite small, on average much less than one photon per pass, suggesting that the radiation should be treated quantum mechanically, and raising doubts as to whether this weak signal even contains sufficient phase information necessary for cooling, and whether it can be reliably amplified to provide the expected cooling on each pass. A careful examination of the dynamics, where the radiation and amplification processes are treated quantum mechanically, indicates that fast cooling is in principle possible, with cooling rates which essentially agree with classical calculations, provided that the effects of the unavoidable amplifier noise are included. Thus, quantum mechanical uncertainties do not present any insurmountable obstacles to optical cooling, but do establish a lower limit on cooling rates and achievable emittances.
In preparation for a demonstration of optical stochastic cooling in the Cornell Electron Storage Ring (CESR) we have developed a particle tracking simulation to study the relevant beam dynamics. Optical radiation emitted in the pickup undulator gives
a momentum kick to that same particle in the kicker undulator. The optics of the electron bypass from pickup to kicker couples betatron amplitude and momentum offset to path length so that the momentum kick reduces emittance and momentum spread. Nearby electrons contribute an incoherent noise. Layout of the bypass line is presented that accommodates optics with a range of transverse and longitudinal cooling parameters. The simulation is used to determine cooling rates and their dependence on bunch and lattice parameters for bypass optics with distinct emittance and momentum acceptance.
We compare the method of Coherent Electron Cooling with Enhanced Optical Cooling. According to our estimations the Enhanced Optical Cooling method demonstrates some advantage for parameters of LHC.
The paper presents a journal version of the Design Report on the Optical Stochastic Cooling experiment to be carried out at IOTA ring in Fermilab later this year. It discusses the theory which experiment is based on, beam parameters, major requiremen
ts to the storage ring systems and technical details of the experiment implementation.
Optical stochastic cooling (OSC) is a promising technique for the cooling of dense particle beams. Its operation at optical frequencies enables obtaining a much larger bandwidth compared to the wellknown microwave-based stochastic cooling. In the OSC
undulator radiation generated by a particle in an upstream pickup undulator is amplified and focused at the location of a downstream kicker undulator. Inside the kicker, a particle interacts with its own radiation field from the pickup. The resulting interaction produces a longitudinal kick with its value depending on the particles momentum which, when correctly phased, yields to longitudinal cooling. The horizontal cooling is achieved by introducing a coupling between longitudinal and horizontal degrees of freedom. Vertical cooling is achieved by coupling between horizontal and vertical motions in the ring. In this paper, we present formulae for computation of the corrective kick and validate them against numerical simulations performed using a wave-optics computer program.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
