اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدVLBI imaging throughout the primary beam using accurate UV shifting
115
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
For Very Long Baseline Interferometry (VLBI), the fringe spacing is extremely narrow compared to the field of view imposed by the primary beam of each element. This means that an extremely large number of resolution units can potentially be imaged from a single observation. We implement and test a technique for efficiently and accurately imaging large VLBI datasets. The DiFX software correlator is used to generate a dataset with extremely high time and frequency resolution. This large dataset is then transformed and averaged multiple times to generate many smaller datasets, each with a phase centre located at a different area of interest. Results of an 8.4 GHz four-station VLBI observation of a field containing multiple sources are presented. Observations of the calibrator 3C345 were used for preliminary tests of accuracy of the shifting algorithm. A high level of accuracy was achieved, making the method suitable even for the most demanding astrometric VLBI observations. One target source (1320+299A) was detected and was used as a phase-reference calibrator in searching for further detections. An image containing 13 billion pixels was constructed by independently imaging 782 visibility datasets covering the entire primary beam of the array. Current implementations of this algorithm and possible future developments in VLBI data analysis are discussed.
قيم البحث
اقرأ أيضاً
We provide the first in situ measurements of antenna element (tile) beam shapes of the Murchison Widefield Array (MWA), a low radio-frequency interferometer and an SKA precursor. Most current MWA processing pipelines use an assumed beam shape, errors
in which can cause absolute and relative flux density errors, as well as polarisation leakage. This makes understanding the primary beam of paramount importance, especially for sensitive experiments such as a measurement of the 21 cm line from the epoch of reionisation (EoR). The calibration requirements for measuring the EoR 21 cm line are so extreme that tile to tile beam variations may affect our ability to make a detection. Measuring the primary beam shape from visibilities alone is challenging, as multiple instrumental, atmospheric, and astrophysical factors contribute to uncertainties in the data. Building on the methods of Neben et al. (2015), we tap directly into the receiving elements of the MWA before any digitisation or correlation of the signal. Using ORBCOMM satellite passes we are able to produce all-sky maps for 4 separate tiles in the XX polarisation. We find good agreement with the cutting-edge fully embedded element (FEE) model of Sokolowski et al. (2017), and observe that the MWA beamformers consistently recreate beam shapes to within ~1dB in the reliable areas of our beam maps. We also clearly observe the effects of a missing dipole from a tile in one of our beam maps, and show that the FEE model is able to reproduce this modified beam shape. We end by motivating and outlining additional onsite experiments to further constrain the primary beam behaviour.
The Murchison Widefield Array (MWA), located in Western Australia, is one of the low-frequency precursors of the international Square Kilometre Array (SKA) project. In addition to pursuing its own ambitious science program, it is also a testbed for w
ide range of future SKA activities ranging from hardware, software to data analysis. The key science programs for the MWA and SKA require very high dynamic ranges, which challenges calibration and imaging systems. Correct calibration of the instrument and accurate measurements of source flux densities and polarisations require precise characterisation of the telescopes primary beam. Recent results from the MWA GaLactic Extragalactic All-sky MWA (GLEAM) survey show that the previously implemented Average Embedded Element (AEE) model still leaves residual polarisations errors of up to 10-20 % in Stokes Q. We present a new simulation-based Full Embedded Element (FEE) model which is the most rigorous realisation yet of the MWAs primary beam model. It enables efficient calculation of the MWA beam response in arbitrary directions without necessity of spatial interpolation. In the new model, every dipole in the MWA tile (4 x 4 bow-tie dipoles) is simulated separately, taking into account all mutual coupling, ground screen and soil effects, and therefore accounts for the different properties of the individual dipoles within a tile. We have applied the FEE beam model to GLEAM observations at 200 - 231 MHz and used false Stokes parameter leakage as a metric to compare the models. We have determined that the FEE model reduced the magnitude and declination-dependent behaviour of false polarisation in Stokes Q and V while retaining low levels of false polarisation in Stokes U.
After a decade of design and construction, South Africas SKA-MID precursor MeerKAT has begun its science operations. To make full use of the widefield capability of the array, it is imperative that we have an accurate model of the primary beam of its
antennas. We have taken available L-band full-polarization astro-holographic observations of three antennas and a generic electromagnetic simulation and created sparse representations of the beams using principal components and Zernike polynomials. The spectral behaviour of the spatial coefficients has been modelled using discrete cosine transform. We have provided the Zernike-based model over a diameter of 10 deg averaged over the beams of three antennas in an associated software tool (EIDOS) that can be useful in direction-dependent calibration and imaging. The model is more accurate for the diagonal elements of the beam Jones matrix and at lower frequencies. As we get more accurate beam measurements and simulations in the future, especially for the cross-polarization patterns, our pipeline can be used to create more accurate sparse representations of MeerKAT beams.
Modern interferometric imaging relies on advanced calibration that incorporates direction-dependent effects. Their increasing number of antennas (e.g. in LOFAR, VLA, MeerKAT/SKA) and sensitivity are often tempered with the accuracy of their calibrati
on. Beam accuracy drives particularly the capability for high dynamic range imaging (HDR - contrast > 1:$10^6$). The Radio Interferometric Measurement Equation (RIME) proposes a refined calibration framework for wide field of views (i.e. beyond the primary lobe and first null) using beam models. We have used holography data taken on 12 antennas of the Very Large Array (VLA) with two different approaches: a `data-driven representation derived from Principal Component Analysis (PCA) and a projection on the Zernike polynomials. We determined sparse representations of the beam to encode its spatial and spectral variations. For each approach, we compressed the spatial and spectral distribution of coefficients using low-rank approximations. The spectral behaviour was encoded with a Discrete Cosine Transform (DCT). We compared our modelling to that of the Cassbeam software which provides a parametric model of the antenna and its radiated field. We present comparisons of the beam reconstruction fidelity vs. `compressibility. We found that the PCA method provides the most accurate model. In the case of VLA antennas, we discuss the frequency ripple over L-band which is associated with a standing wave between antenna reflectors. The results are a series of coefficients that can easily be used `on-the-fly in calibration pipelines to generate accurate beams at low computing costs.
The central challenge in 21~cm cosmology is isolating the cosmological signal from bright foregrounds. Many separation techniques rely on the accurate knowledge of the sky and the instrumental response, including the antenna primary beam. For drift-s
can telescopes such as the Hydrogen Epoch of Reionization Array citep[HERA, ][]{DeBoer2017} that do not move, primary beam characterization is particularly challenging because standard beam-calibration routines do not apply citep{Cornwell2005} and current techniques require accurate source catalogs at the telescope resolution. We present an extension of the method from citet{Pober2012} where they use beam symmetries to create a network of overlapping source tracks that break the degeneracy between source flux density and beam response and allow their simultaneous estimation. We fit the beam response of our instrument using early HERA observations and find that our results agree well with electromagnetic simulations down to a -20~dB level in power relative to peak gain for sources with high signal-to-noise ratio. In addition, we construct a source catalog with 90 sources down to a flux density of 1.4~Jy at 151~MHz.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
