اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدThe Structure and Low-Energy Phonons of the Nonferroelectric Mixed Perovskite: BaMg1/3Ta2/3O3
201
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
The structure of BaMg1/3Ta2/3O3 (BMT) has been studied using X-ray scattering. The phonons have been measured and the results are similar to those of other materials with the perovskite structure such as PbMg1/3Nb2/3O3 (PMN). The acoustic and lowest energy optic branches were measured but it was not possible to measure the branches of higher energy, possibly this is because they largely consist of oxygen motions. High-resolution inelastic measurements also showed that the diffuse scattering was strictly elastic and not directly related to the phonon spectra. A diffuse scattering was observed in BMT near the (Hpm1/2, Kpm1/2, Lpm1/2) points in the Brillouin zone and this had a characteristic cube shape. This arises from ordering of the B-site ions in BMT. Additional experiments revealed a diffuse scattering in BMT similar in shape to Bragg reflections at wave-vectors of the form (Hpm1/3, Kpm1/3, Lpm1/3). Such reflections were also observed by Lufaso [Chem. Matt. 16 (2004) 2148] from powders and suggest that this structure of BMT consists of 4 differently oriented domains of a trigonal structure and results from a different ordering of the B-site ions from that responsible for the scattering at the (Hpm1/2, Kpm1/2, Lpm1/2) points. The results lead us to suggest that for BMT single crystals the bulk has the properties of a cubic perovskite, whereas the surface may have quite different structure from that of the bulk. This difference resembles the behaviour of cubic relaxors like PMN and PMN doped by PbTiO3, where significant surface effects have been reported.
قيم البحث
اقرأ أيضاً
We address the low-energy effective Hamiltonian of electron doped d0 perovskite semiconductors in cubic and tetragonal phases using the k*p method. The Hamiltonian depends on the spin-orbit interaction strength, on the temperature-dependent tetragona
l distortion, and on a set of effective-mass parameters whose number is determined by the symmetry of the crystal. We explain how these parameters can be extracted from angle resolved photo-emission, Raman spectroscopy, and magneto-transport measurements and estimate their values in SrTiO3.
Hexagonal perovskites are an attractive group of materials due to their various polymorph phases and rich structure-property relationships. BaRuO3 (BRO) is a prototypical hexagonal perovskite, in which the electromagnetic properties are significantly
modified depending on its atomic structure. Whereas thin-film epitaxy would vastly expand the application of hexagonal perovskites by epitaxially stabilizing various metastable polymorphs, the atomic structure of epitaxial hexagonal perovskites, especially at the initial growth stage, has rarely been investigated. In this study, we show that an intriguing nucleation behavior takes place during the initial stabilization of a hexagonal perovskite 9R BaRuO3 (BRO) thin film on a (111) SrTiO3 (STO) substrate. We use high-resolution high-angle annular dark field scanning transmission electron microscopy in combination with geometrical phase analysis to understand the local strain relaxation behavior. We find that nano-scale strained layers, composed of different RuO6 octahedral stacking, are initially formed at the interface, followed by a relaxed single crystal9R BRO thin film. Within the interface layer, hexagonal BROs are nucleated on the STO (111) substrate by both corner- and face-sharing. More interestingly, we find that the boundaries between the differently-stacked nucleation layers, i.e. heterostructural boundaries facilitates strain relaxation, in addition to the formation of conventional misfit dislocations evolving from homostructural boundaries. Our observations reveal an important underlying mechanism to understand the thin-film epitaxy and strain accommodation in hexagonal perovskites.
In a lot of systems, charge transport is governed by local features rather than being a global property as suggested by extracting a single resistance value. Consequently, techniques that resolve local structure in the electronic potential are crucia
l for a detailed understanding of electronic transport in realistic devices. Recently, we have introduced a new potentiometry method based on low-energy electron microscopy (LEEM) that utilizes characteristic features in the reflectivity spectra of layered materials [1]. Performing potentiometry experiments in LEEM has the advantage of being fast, offering a large field of view and the option to zoom in and out easily, and of being non-invasive compared to scanning-probe methods. However, not all materials show clear features in their reflectivity spectra. Here we, therefore, focus on a different version of low-energy electron potentiometry (LEEP) that uses the mirror mode transition, i.e. the drop in electron reflectivity around zero electron landing energy when they start to interact with the sample rather than being reflected in front of it. This transition is universal and sensitive to the local electrostatic surface potential (either workfunction or applied potential). It can consequently be used to perform LEEP experiments on a broader range of material compared to the method described in Ref. [1]. We provide a detailed description of the experimental setup and demonstrate LEEP on workfunction-related intrinsic potential variations on the Si(111) surface and for a metal-semiconductor-metal junction with an external bias applied. In the latter, we visualize the Schottky effect at the metal-semiconductor interface. Finally, we compare how robust the two LEEP techniques discussed above are against image distortions due to sample inhomogeneities or contamination.
The structural and electronic properties of twisted bilayer graphene are investigated from first principles and tight binding approach as a function of the twist angle (ranging from the first magic angle $theta=1.08^circ$ to $theta=3.89^circ$, with t
he former corresponding to the largest unit cell, comprising 11164 carbon atoms). By properly taking into account the long-range van der Waals interaction, we provide the patterns for the atomic displacements (with respect to the ideal twisted bilayer). The out-of-plane relaxation shows an oscillating (buckling) behavior, very evident for the smallest angles, with the atoms around the AA stacking regions interested by the largest displacements. The out-of-plane displacements are accompanied by a significant in-plane relaxation, showing a vortex-like pattern, where the vorticity (intended as curl of the displacement field) is reverted when moving from the top to the bottom plane and viceversa. Overall, the atomic relaxation results in the shrinking of the AA stacking regions in favor of the more energetically favorable AB/BA stacking domains. The measured flat bands emerging at the first magic angle can be accurately described only if the atomic relaxations are taken into account. Quite importantly, the experimental gaps separating the flat band manifold from the higher and lower energy bands cannot be reproduced if only in-plane or only out-of-plane relaxations are considered. The stability of the relaxed bilayer at the first magic angle is estimated to be of the order of 0.5-0.9 meV per atom (or 7-10 K). Our calculations shed light on the importance of an accurate description of the vdW interaction and of the resulting atomic relaxation to envisage the electronic structure of this really peculiar kind of vdW bilayers.
It is widely accepted that structural glasses and disordered crystals exhibit anomalies in the their thermal, mechanical and acoustic properties as manifestations of the breakdown of the long-wavelength approximation in a disordered dissipative envir
onment. However, the same type of glassy-like anomalies (i.e. boson peak in the vibrational density of states (VDOS) above the Debye level, peak in the normalized specific heat at $Tsimeq10 K$ etc) have been recently observed also in perfectly ordered crystals, including thermoelectric compounds. Here we present a theory that predicts these surprising effects in perfectly ordered crystals as a result of low-lying (soft) optical phonons. In particular, it is seen that a strong boson peak anomaly (low-energy excess of modes) in the VDOS can be due almost entirely to the presence of low-energy optical phonons, provided that their energy is comparable to that of the acoustic modes at the Brillouin zone boundary. The boson peak is predicted also to occur in the heat capacity at low $T$. In presence of strong damping (which might be due to anharmonicities in the ordered crystals), these optical phonons contribute to the low-$T$ deviation from Debyes $T^{3}$ law, producing a linear-in-$T$ behavior which is typical of glasses, even though no assumptions of disorder whatsoever are made in the model. These findings are relevant for understanding and tuning thermal transport properties of thermoelectric compounds, and possibly for the enhancement of electron-phonon superconductivity.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
