اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدChanneling and Volume Reflection Based Crystal Collimation of Tevatron Circulating Beam Halo (T-980)
152
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
The T980 crystal collimation experiment is underway at the Tevatron to determine if this technique could increase 980 GeV beam-halo collimation efficiency at high-energy hadron colliders such as the Tevatron and the LHC. T980 also studies various crystal types and parameters. The setup has been substantially enhanced during the Summer 2009 shutdown by installing a new O-shaped crystal in the horizontal goniometer, as well as adding a vertical goniometer with two alternating crystals (O-shaped and multi-strip) and additional beam diagnostics. First measurements with the new system are quite encouraging, with channeled and volume-reflected beams observed on the secondary collimators as predicted. Investigation of crystal collimation efficiencies with crystals in volume reflection and channeling modes are described in comparison with an amorphous primary collimator. Results on the system performance are presented for the end-of-store studies and for entire collider stores. The first investigation of colliding beam collimation simultaneously using crystals in both the vertical and horizontal plane has been made in the regime with horizontally channeled and vertically volume-reflected beams. Planning is underway for significant hardware improvements during the FY10 summer shutdown and for dedicated studies during the final year of Tevatron operation and also for a post-collider beam physics running period.
قيم البحث
اقرأ أيضاً
The T-980 bent crystal collimation experiment at the Tevatron has recently acquired substantial enhancements. First, two new crystals - a 16-strip one manufactured and characterized by the INFN Ferrara group and a quasi-mosaic crystal manufactured an
d characterized by the PNPI group. Second, a two plane telescope with 3 high-resolution pixel detectors per plane along with corresponding mechanics, electronics, control and software has been manufactured, tested and installed in the E0 crystal region. The purpose of the pixel telescope is to measure and image channeled (CH), volume-reflected (VR) and multiple volume-reflected (MVR) beam profiles produced by bent crystals. Third, an ORIGIN-based system has been developed for thorough analysis of experimental and simulation data. Results of analysis are presented for different types of crystals used from 2005 to present for channeling and volume reflection including pioneering tests of two-plane crystal collimation at the collider, all in comparison with detailed simulations.
Strong effect of beam coherent scattering (reflection) in a field of bent crystal is observed in crystal collimation experiments performed with heavy ions and protons at RHIC and started at Tevatron collider. Detailed simulation using Monte Carlo cod
e CATCH is done in order to understand the observations and relate them to the physics of beam coherent scattering in crystal. A.M. Taratin and S.A. Vorobiev predicted the effect of beam volume reflection in bent crystals in 1987. The presented data is the first manifestation of this new physical phenomenon in experiment.
The paper devoted to investigation of volume reflection and channeling processes of ultrarela- tivistic positive charged particles moving in germanium single crystals. We demonstrate that the choice of atomic potential on the basis of Hartree-Fock me
thod and correct choice of Debye tem- perature allow us to describe the above mentioned processes in a good agreement with the recent experiments. Moreover, the presented in the paper universal form of equations for volume reflection gives true description of the process at a wide range of particle energies. Standing on this study we make predictions for mean angle reflection (as a function of bending radius) of positive and negative particles for germanium (110) and (111) crystallographic planes.
New crystal technique - array of bent strips and a fan-type reflector, based on thin straight plates - have been used for research of extraction and collimation a circulating beam in the U-70 accelerator at the energy 50 GeV and 1.3 GeV. It is shown,
that new devices can effectively steer a beam in a wide energy range. For protons with energy 50 GeV efficiency of extraction and collimation about 90 % has been achieved which is record for this method. Reduction of particle losses in 2-3 times was observed also in accelerator at application of different crystals in comparison with the usual one-stage collimation scheme of beam with a steel absorber.
The Large Hadron Collider (LHC) uses a multi-stage collimator system to absorb the growing halo of circulating beams to protect and ensure reliable operation of superconducting magnets. A similar system is planned for the Future Circular Collider (FC
C). In anticipation of the LHC operation with high luminosity, research is being conducted to improve the collimation system. Studies have shown that one of the solutions to improve beam collimation is to use channeling in a short curved crystal, which acts as a primary collimator, throwing particles deep into the secondary collimator by channeling. This system is very sensitive to the angular position of the crystal and possible vibrations of different nature. In this paper, we propose a different approach to crystal collimation based on the volume reflection of particles from curved crystallographic planes in a sequence of crystals. The positive qualities of this scheme are substantiated and a multi-strip crystal device capable of implementing it is proposed.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
