اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديد120-mm superconducting quadrupole for interaction regions of hadron colliders
85
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
Magnetic and mechanical designs of a Nb3Sn quadrupole magnet with 120-mm aperture suitable for interaction regions of hadron colliders are presented. The magnet is based on a two-layer shell-type coil and a cold iron yoke. Special spacers made of a low-Z material are implemented in the coil mid-planes to reduce the level of radiation heat deposition and radiation dose in the coil. The quadrupole mechanical structure is based on aluminum collars supported by an iron yoke and a stainless steel skin. Magnet parameters including maximum field gradient and field harmonics, Nb3Sn coil pre-stress and protection at the operating temperatures of 4.5 and 1.9 K are reported. The level and distribution of radiation heat deposition in the coil and other magnet components are discussed.
قيم البحث
اقرأ أيضاً
Corrections of gradient errors in the interactions regions (IRs) of high energy colliders have traditionally been made by changing the strengths of quadrupoles that are common to both beams, such as the triplet quadrupoles. This article shows that ma
gnetic errors in the IR quadrupoles that are no common to both beams, such as the matching quadrupoles, can have an important influence and, therefore, the correction should also include these quadrupoles. A correction based on twelve IR quadrupoles (common and no common) is presented and validated through MADX simulations. To estimate the strengths of this correction, the action and phase in the inter-triplet space, the space that separates the two triplets of the IR, are required. A novel method to estimate these quantities is also presented. The main sources of uncertainties in this novel method are identified and compared to the current method that uses two beam position monitor within the inter-triplet space. Finally, LHC experimental data is used to estimate the strengths of a twelve-quadrupole correction in the interaction region 1 of the LHC. The resulting correction is compared with a six-quadrupole correction estimated with another method called segment-by-segment (SBS).
From the field calculation, we can also draw a conclusion that the different order harmonics have an independent property, which we can design a combined magnet by adding some high order harmonics, so that it can save space and reduce the magnet cost.
We present a concept for control of the ion polarization, called a transparent spin method. The spin transparency is achieved by designing such a synchrotron structure that the net spin rotation angle in one particle turn is zero. The polarization di
rection of any ions including deuterons can be efficiently controlled using weak quasi-static fields. These fields allow for dynamic adjustment of the polarization direction during an experiment. The main features of the Transparent Spin method are illustrated in a figure-8 collider. The results are relevant to the Electron-Ion Collider considered in the US, the ion-ion collider NICA constructed in Russia, and a polarized Electron-ion collider planned in China.
DAFNE, the Frascati F-factory, has recently completed experimental runs for the three main detectors, KLOE, FINUDA and DEAR achieving 1.6x10E+32 cm-2s-1 peak and 10 pb-1 daily integrated luminosities. Improving these results by a significant factor r
equires changing the collision scheme. For this reason, in view of the SIDDHARTA detector installation, relevant modifications of the machine have been realized, aimed at implementing a new collision scheme based on a large Piwinski angle and crab-waist, together with several other hardware modifications involving injection kickers, bellows and beam pipe sections.
High energy hadron colliders have been the tools for discovery at the highest mass scales of the energy frontier from the SppS, to the Tevatron and now the LHC. This report reviews future hadron collider projects from the high luminosity LHC upgrade
to a 100 TeV hadron collider in a large tunnel, the underlying technology challenges and R&D directions and presents a series of recommendations for the future development of hadron collider research and technology.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
