اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدShape control of QDs studied by cross-sectional scanning tunneling microscopy
339
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
In this cross-sectional scanning tunneling microscopy study we investigated various techniques to control the shape of self-assembled quantum dots (QDs) and wetting layers (WLs). The result shows that application of an indium flush during the growth of strained InGaAs/GaAs QD layers results in flattened QDs and a reduced WL. The height of the QDs and WLs could be controlled by varying the thickness of the first capping layer. Concerning the technique of antimony capping we show that the surfactant properties of Sb result in the preservation of the shape of strained InAs/InP QDs during overgrowth. This could be achieved by both a growth interrupt under Sb flux and capping with a thin GaAsSb layer prior to overgrowth of the uncapped QDs. The technique of droplet epitaxy was investigated by a structural analysis of strain free GaAs/AlGaAs QDs. We show that the QDs have a Gaussian shape, that the WL is less than 1 bilayer thick, and that minor intermixing of Al with the QDs takes place.
قيم البحث
اقرأ أيضاً
Hydrogenation of nitrogen (N) doped GaAs allows for reversible tuning of the bandgap and the creation of site controlled quantum dots through the manipulation of N-nH complexes, N-nH complexes, wherein a nitrogen atom is surrounded by n hydrogen (H)
atoms. Here we employ cross-sectional scanning tunneling microscopy (X-STM) to study these complexes in the GaAs (110) surface at the atomic scale. In addition to that we performed density functional theory (DFT) calculations to determine the atomic properties of the N-nH complexes. We argue that at or near the (110) GaAs surface two H atoms from N-nH complexes dissociate as an H$_2$ molecule. We observe multiple features related to the hydrogenation process, of which a subset is classified as N-1H complexes. These N-1H related features show an apparent reduction of the local density of states (LDOS), characteristic to N atoms in the GaAs (110) surface with an additional apparent localized enhancement of the LDOS located in one of three crystal directions. N-nH features can be manipulated with the STM tip. Showing in one case a switching behavior between two mirror-symmetric states and in another case a removal of the localized enhancement of the LDOS. The disappearance of the bright contrast is most likely a signature of the removal of an H atom from the N-nH complex.
Silicon (Si) donors in GaAs have been the topic of extensive studies since Si is the most common and well understood n-type dopant in III-V semiconductor devices and substrates. The indirect bandgap of AlAs compared to the direct one of GaAs leads to
interesting effects when introducing Si dopants. Here we present a study of cross-sectional scanning tunneling microscopy (X-STM) and density functional theory (DFT) calculations to study Si donors in AlAs at the atomic scale. Based on their crystal symmetry and contrast strengths, we identify Si donors up to four layers below the (110) surface of AlAs. Interestingly, their short-range local density of states (LDOS) is very similar to Si atoms in the (110) surface of GaAs. Additionally we show high-resolution images of Si donors in all these layers. For empty state imaging, the experimental and simulated STM images based on DFT show excellent agreement for Si donor up to two layers below the surface.
We present results on the direct spatial mapping of the wave-function of a hole bound to a Mn acceptor in GaAs. To investigate individual Mn dopants at the atomic scale in both ionized and neutral configurations, we used a room temperature cross-sect
ional scanning tunneling microscope (X-STM). We found that in the neutral configuration manganese manifests itself as an anisotropic cross-like feature. We attribute this feature to a hole weakly bound to the Mn ion forming the [Mn2+(3d5) + hole] complex.
Cross-sectional scanning tunneling microscopy (X-STM) was employed to characterize the InAs submonolayer quantum dots (SMLQDs) grown on top of a Si-doped GaAs(001) substrate in the presence of (2X4) and c(4X4) surface reconstructions. Multiple layers
were grown under different conditions to study their effects on the formation, morphology and local composition of the SMLQDs. The morphological and compositional variations in SMLQDs were observed by both filled and emptystate imaging. A detailed analysis of indium segregation in the SMLQDs layers was described by fitting local indium concentration profile with a standard segregation model. A strong influence of arsenic flux over the formation of the SMLQDs and indium incorporation was observed and reported. We investigated the well-width fluctuations of the InGaAs quantum well (QW) in which SMLQDs were formed . The monolayer fluctuations of the well width were negligible compared to the more pronounced compositional fluctuations in all the layers. Keywords: Submonolayer quantum dots, Surface reconstruction, X-STM, Indium segregation
An individual Mn acceptor in GaAs is mapped by Cross-sectional Scanning Tunneling Microscopy (X-STM) at room temperature and a strongly anisotropic shape of the acceptor state is observed. An acceptor state manifests itself as a cross-like feature wh
ich we attribute to a valence hole weakly bound to the Mn ion forming the (Mn$^{2+}3d^5+hole$) complex. We propose that the observed anisotropy of the Mn acceptor wave-function is due to the d-wave present in the acceptor ground state.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
