اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدPSRCHIVE and PSRFITS: Definition of the Stokes Parameters and Instrumental Basis Conventions
81
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
This paper defines the mathematical convention adopted to describe an electromagnetic wave and its polarisation state, as implemented in the PSRCHIVE software and represented in the PSRFITS definition. Contrast is made between the convention that has been widely accepted by pulsar astronomers and the IAU/IEEE definitions of the Stokes parameters. The former is adopted as the PSR/IEEE convention, and a set of useful parameters are presented for describing the differences between the PSR/IEEE standard and the conventions (either implicit or explicit) that form part of the design of observatory instrumentation. To aid in the empirical determination of instrumental convention parameters, well-calibrated average polarisation profiles of PSR J0304+1932 and PSR J0742-2822 are presented at radio wavelengths of approximately 10, 20, and 40 cm.
قيم البحث
اقرأ أيضاً
Since more than a century astronomers measure the position angle of the major axis of the polarization ellipse starting from the North direction and increasing counter-clockwise, when looking at the source. This convention has been enforced by the IA
U with a Resolution in 1973. Much later the WMAP satellite, which has observed the polarization of the cosmic microwave background, has unfortunately adopted the opposite convention: the polarization position angle is measured starting from the South and increasing clockwise, when looking at the source. This opposite convention has been followed by most cosmic microwave background polarization experiments and is causing obvious problems and misunderstandings. The attempts and prospects to enforce the official IAU convention are described.
When using valid foreground and signal models, the uncertainties on extracted signals in global 21-cm signal experiments depend principally on the overlap between signal and foreground models. In this paper, we investigate two strategies for decreasi
ng this overlap: (i) utilizing time dependence by fitting multiple drift-scan spectra simultaneously and (ii) measuring all four Stokes parameters instead of only the total power, Stokes I. Although measuring polarization requires different instruments than are used in most existing experiments, all existing experiments can utilize drift-scan measurements merely by averaging their data differently. In order to evaluate the increase in constraining power from using these two techniques, we define a method for connecting Root-Mean-Square (RMS) uncertainties to probabilistic confidence levels. Employing simulations, we find that fitting only one total power spectrum leads to RMS uncertainties at the few K level, while fitting multiple time-binned, drift-scan spectra yields uncertainties at the $lesssim 10$ mK level. This significant improvement only appears if the spectra are modeled with one set of basis vectors, instead of using multiple sets of basis vectors that independently model each spectrum. Assuming that they are simulated accurately, measuring all four Stokes parameters also leads to lower uncertainties. These two strategies can be employed simultaneously and fitting multiple time bins of all four Stokes parameters yields the best precision measurements of the 21-cm signal, approaching the noise level in the data.
We present a pedagogical review of the weak gravitational lensing measurement process and its connection to major scientific questions such as dark matter and dark energy. Then we describe common ways of parametrizing systematic errors and understand
ing how they affect weak lensing measurements. Finally, we discuss several instrumental systematics and how they fit into this context, and conclude with some future perspective on how progress can be made in understanding the impact of instrumental systematics on weak lensing measurements.
The Large Observatory for X-ray Timing (LOFT) is one of the five candidates that were considered by ESA as an M3 mission (with launch in 2022-2024). It is specifically designed to exploit the diagnostics of very rapid X-ray flux and spectral variabil
ity that directly probe the motion of matter down to distances very close to black holes and neutron stars, as well as the physical state of ultradense matter. The LOFT scientific payload is composed of the Large Area Detector (LAD), devoted to spectral-timing observation, and the Wide Field Monitor (WFM), whose primary goal it is to monitor the X-ray sky for transient events that need to be followed up with the LAD, and to measure the long-term variability of galactic X-ray sources and localize gamma-ray bursts. Here we describe the simulations carried out to optimize the WFM design and to characterize the instrument response to both isolated sources and crowded fields in the proximity of the galactic bulge.
This paper defines the UK Infra-Red Telescope (UKIRT) Hemisphere Survey (UHS) and release of the remaining ~12,700 sq.deg of J-band survey data products. The UHS will provide continuous J and K-band coverage in the northern hemisphere from a declinat
ion of 0 deg to 60 deg by combining the existing Large Area Survey, Galactic Plane Survey and Galactic Clusters Survey conducted under the UKIRT Infra-red Deep Sky Survey (UKIDSS) programme with this new additional area not covered by UKIDSS. The released data includes J-band imaging and source catalogues over the new area, which, together with UKIDSS, completes the J-band UHS coverage over the full ~17,900 sq.deg area. 98 per cent of the data in this release have passed quality control criteria, the remaining 2 per cent being scheduled for re-observation. The median 5-sigma point source sensitivity of the released data is 19.6 mag (Vega). The median full width at half-maximum of the point spread function across the dataset is 0.75 arcsec. In this paper, we outline the survey management, data acquisition, processing and calibration, quality control and archiving as well as summarising the characteristics of the released data products. The data are initially available to a limited consortium with a world-wide release scheduled for August 2018.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
