اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدSpin Injection Enhancement Through Schottky Barrier Superlattice Design
131
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
We predict it is possible to achieve high-efficiency room-temperature spin injection from a mag- netic metal into InAs-based semiconductors using an engineered Schottky barrier based on an InAs/AlSb superlattice. The Schottky barrier with most metals is negative for InAs and positive for AlSb. For such metals there exist InAs/AlSb superlattices with a conduction band edge perfectly aligned with the metals Fermi energy. The initial AlSb layer can be grown to the thickness required to produce a desired interface resistance. We show that the conductivity and spin lifetimes of such superlattices are sufficiently high to permit efficient spin injection from ferromagnetic metals.
قيم البحث
اقرأ أيضاً
A scheme is proposed to electrically measure the spin-momentum coupling in the topological insulator surface state by injection of spin polarized electrons from silicon. As a first approach, devices were fabricated consisting of thin (<100nm) exfolia
ted crystals of Bi2Se3 on n-type silicon with independent electrical contacts to silicon and Bi2Se3. Analysis of the temperature dependence of thermionic emission in reverse bias indicates a barrier height of 0.34 eV at the Si-Bi2Se3 interface. This robust Schottky barrier opens the possibility of novel device designs based on sub-band gap internal photoemission from Bi2Se3 into Si.
Electron spin polarizations of 32% are obtained in a GaAs quantum well via electrical injection through a reverse-biased Fe/AlGaAs Schottky contact. An analysis of the transport data using the Rowell criteria demonstrates that single step tunneling i
s the dominant transport mechanism. The current-voltage data show a clear zero-bias anomaly and phonon signatures corresponding to the GaAs-like and AlAs-like longitudinal-optical phonon modes of the AlGaAs barrier, providing further evidence for tunneling. These results provide experimental confirmation of several theoretical analyses indicating that tunneling enables significant spin injection from a metal into a semiconductor.
Schottky Barrier (SB)-MOSFET technology offers intriguing possibilities for cryogenic nano-scale devices, such as Si quantum devices and superconducting devices. We present experimental results on a novel device architecture where the gate electrode
is self-aligned with the device channel and overlaps the source and drain electrodes. This facilitates a sub-5 nm gap between the source/drain and channel, and no spacers are required. At cryogenic temperatures, such devices function as p-MOS Tunnel FETs, as determined by the Schottky barrier at the Al-Si interface, and as a further advantage, fabrication processes are compatible with both CMOS and superconducting logic technology.
Graphene electrons feature a pair of massless Dirac cones of opposite pseudospin chirality at two valleys. Klein tunneling refers to the intriguing capability of these chiral electrons to penetrate through high and wide potential barrier. The two val
leys have been treated independently in the literature, where time reversal symmetry dictates that neither the normal incidence transmission nor the angle-averaged one can have any valley polarization. Here we show that, when intervalley scattering by barrier is accounted, graphene electrons normally incident at a superlattice barrier can experience a fully valley-selective Klein tunneling, i.e. perfect transmission in one valley, and perfect reflection in the other. Intervalley backscattering creates staggered pseudospin gaps in the superlattice barrier, which, combined with the valley contrast in pseudospin chirality, determines the valley polarity of Klein tunneling. The angle averaged transmission can have a net valley polarization of 20% for a 5-period barrier, and exceed 75% for a 20-period barrier. Our finding points to an unexpected opportunity to realize valley functionalities in graphene electronics.
In this study, a model of a Schottky-barrier carbon nanotube field- effect transistor (CNT-FET), with ferromagnetic contacts, has been developed. The emphasis is put on analysis of current-voltage characteristics as well as shot (and thermal) noise.
The method is based on the tight-binding model and the non- equilibrium Greens function technique. The calculations show that, at room temperature, the shot noise of the CNT FET is Poissonian in the sub-threshold region, whereas in elevated gate and drain/source voltage regions the Fano factor gets strongly reduced. Moreover, transport properties strongly depend on relative magnetization orientations in the source and drain contacts. In particular, one observes quite a large tunnel magnetoresistance, whose absolute value may exceed 50%.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
