اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدFirst tests of a 800 kJ HTS SMES
476
0
0.0
(
0
)
تأليف
Pascal Tixador
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
SMES using high critical temperature superconductors are interesting for high power pulsed sources. Operation at temperatures above 20 K makes cryogenics easier, enhances stability and improves operation as pulsed power source. In the context of a DGA (Delegation Generate pour lArmement) project, we have designed and constructed a 800 kJ SMES. The coil is wound with Nexans conductors made of Bi-2212 PIT tapes soldered in parallel. The coil consists in 26 superposed simple pancakes wound and bonded on sliced copper plates coated with epoxy. The rated current is 315 A for an energy of 814 kJ. The external diameter of the coil is 814 mm and its height 222 mm. The cooling at 20 K is only performed by conduction from cryocoolers to make cryogenics very friendly and invisible for the SMES users. The cooling down has been successfully carried out and the thermal system works as designed. After a brief description of the SMES design and construction, some tests will be presented. From a current of 244 A, the SMES delivered 425 kJ to a resistance with a maximum power of 175 kW.
قيم البحث
اقرأ أيضاً
Since the summer of 2003, a large Micromegas TPC prototype (1000 channels, 50 cm drift, 50 cm diameter) has been operated in a 2T superconducting magnet at Saclay. A description of this apparatus and first results from cosmic ray tests are presented.
Additional measurements using simpler detectors with a laser source, an X-ray gun and radio-active sources are discussed. Drift velocity and gain measurements, electron attachment and aging studies for a Micromegas TPC are presented. In particular, using simulations and measurements, it is shown that an $Argon-CF_4$ mixture is optimal for operation at a future Linear Collider.
The use of high-temperature superconductors in electric machines offers potentially large gains in performance compared to conventional conductors, but also comes with unique challenges. Here, the electromagnetic properties of superconducting electri
c machines with bulk HTS trapped-field magnets in the rotor and conventional copper coils in the stator are investigated. To this end, an analytical model of the electromagnetic field in radial air-gap synchronous electric machines is developed and validated, taking into account the specific difficulties that occur in the treatment of machines with bulk HTS. Using this model, the influence of pole pair number, stator winding thickness, rotor surface coverage, and air gap width on the machines Esson coefficient is calculated. In contrast to numerical simulations, the method presented here can provide results within minutes, making it particularly useful for work in early development and systems engineering, where large parameter spaces must be investigated quickly.
A compact HTS cable that is able to carry large current density is crucial for developing high field accelerator magnets. We are reporting a novel HTS cable (named X-cable) that could achieve a high current density as the Roebel cable, but is impleme
nted by in-plane bending stacked HTS tapes directly to realize the transposition. The cable is jointly developed with an industrial company on a production line: ready for large scale production from the beginning. Recently, a prototype cable with REBCO coated conductor has been successfully fabricated. Test results show no significant degradation, demonstrated the feasibility of such cable concept. In this paper, the cables design concept, in-plane bending performance of the REBCO tapes, fabrication procedure and test results of this first prototype cable will be presented.
In the context of developing a hadron calorimeter with extremely fine granularity for the application of Particle Flow Algorithms to the measurement of jet energies at a future lepton collider, we report on extensive tests of a small scale prototype
calorimeter. The calorimeter contained up to 10 layers of Resistive Plate Chambers (RPCs) with 2560 1 times 1 cm2 readout pads, interleaved with steel absorber plates. The tests included both long-term Cosmic Ray data taking and measurements in particle beams, where the response to broadband muons and to pions and positrons with energies in the range of 1 - 16 GeV was established. Detailed measurements of the chambers efficiency as function of beam intensity have also been performed using 120 GeV protons at varying intensity. The data are compared to simulations based on GEANT4 and to analytical calculations of the rate limitations.
Gas electron multiplier (GEM) is widely used in modern gas detectors of ionizing radiation in experiments on high-energy physics at accelerators and in other fields of science. Typically the GEM devices are based on a dielectric foil with holes and e
lectrodes on both sides. GEMs made by radiation-hard dielectrics or wide band-gap semiconductors are desirable for some applications. The results of the first tests of the gas electron multiplier made of radiation-hard materials, such as polycrystalline CVD diamond with a thickness of 100 microns is described. Here we report on fabrication of GEM based on free-standing polycrystalline CVD diamond film and its first test.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
