اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدOne-to-one full scale simulations of laser wakefield acceleration using QuickPIC
99
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
We use the quasi-static particle-in-cell code QuickPIC to perform full-scale, one-to-one LWFA numerical experiments, with parameters that closely follow current experimental conditions. The propagation of state-of-the-art laser pulses in both preformed and uniform plasma channels is examined. We show that the presence of the channel is important whenever the laser self-modulations do not dominate the propagation. We examine the acceleration of an externally injected electron beam in the wake generated by 10 J laser pulses, showing that by using ten-centimeter-scale plasma channels it is possible to accelerate electrons to more than 4 GeV. A comparison between QuickPIC and 2D OSIRIS is provided. Good qualitative agreement between the two codes is found, but the 2D full PIC simulations fail to predict the correct laser and wakefield amplitudes.
قيم البحث
اقرأ أيضاً
Particle energy chirp is shown to be a useful instrument in the staging laser wake field acceleration directed to generation of high-quality dense electron beams. The chirp is a necessary tool to compensate non-uniformity of acceleration field in lon
gitudinal direction and achieve essential reduction of energy dispersion. This is demonstrated via particle-in-cell simulations exploiting the splitting technique for plasma and beam electrons. Properly chosen beam chirps allow decrease in the energy dispersion of order of magnitude in every single stage during acceleration to the GeV energy range.
We demonstrate that hybrid laser wakefield and direct acceleration (LWDA) can be significantly improved by using two laser pulses with different polarizations or frequencies. The improvement entails higher energy and charge of the accelerated electro
ns, as well as weaker sensitivity to the time delay between the leading (pump) pulse responsible for generating the wakefield, and the trailing laser pulse responsible for direct laser acceleration (DLA). When the two laser pulses have the same frequency, it is shown that it is advantageous to have their polarization states orthogonal to each other. A specific scenario of a frequency-doubled ($lambda_{rm DLA}=lambda_{rm pump}/2$) DLA laser pulse is also considered, and found to be an improvement over the single-frequency ($lambda_{rm DLA} = lambda_{rm pump}$) scenario.
In this proceeding, we show that when the drive laser pulse overlaps the trapped electrons in a laser wakefield accelerator (LWFA), those electrons can gain energy from direct laser acceleration (DLA) over extended distances despite the evolution of
both the laser and the wake. Through simulations, the evolution of the properties of both the laser and the electron beam is quantified, and then the resonance condition for DLA is examined in the context of this change. We find that although the electrons produced from the LWFA cannot continuously satisfy the DLA resonance condition, they nevertheless can gain a significant amount of energy from DLA.
One of the most robust methods, demonstrated up to date, of accelerating electron beams by laser-plasma sources is the utilization of plasma channels generated by the capillary discharges. These channels, i.e., plasma columns with a minimum density a
long the laser pulse propagation axis, may optically guide short laser pulses, thereby increasing the acceleration length, leading to a more efficient electron acceleration. Although the spatial structure of the installation is simple in principle, there may be some important effects caused by the open ends of the capillary, by the supplying channels etc., which require a detailed 3D modeling of the processes taking place in order to get a detailed understanding and improve the operation. However, the discharge plasma, being one of the most crucial components of the laser-plasma accelerator, is not simulated with the accuracy and resolution required to advance this promising technology. In the present work, such simulations are performed using the code MARPLE. First, the process of the capillary filling with a cold hydrogen before the discharge is fired, through the side supply channels is simulated. The main goal of this simulation is to get a spatial distribution of the filling gas in the region near the open ends of the capillary. A realistic geometry is used for this and the next stage simulations, including the insulators, the supplying channels as well as the electrodes. Second, the simulation of the capillary discharge is performed with the goal to obtain a time-dependent spatial distribution of the electron density near the open ends of the capillary as well as inside the capillary. Finally, to evaluate effectiveness of the beam coupling with the channeling plasma wave guide and electron acceleration, modeling of laser-plasma interaction was performed with the code INF&RNO
When modeling laser wakefield acceleration (LWFA) using the particle-in-cell (PIC) algorithm in a Lorentz boosted frame, the plasma is drifting relativistically at $beta_b c$ towards the laser, which can lead to a computational speedup of $sim gamma_
b^2=(1-beta_b^2)^{-1}$. Meanwhile, when LWFA is modeled in the quasi-3D geometry in which the electromagnetic fields and current are decomposed into a limited number of azimuthal harmonics, speedups are achieved by modeling three dimensional problems with the computation load on the order of two dimensional $r-z$ simulations. Here, we describe how to combine the speed ups from the Lorentz boosted frame and quasi-3D algorithms. The key to the combination is the use of a hybrid Yee-FFT solver in the quasi-3D geometry that can be used to effectively eliminate the Numerical Cerenkov Instability (NCI) that inevitably arises in a Lorentz boosted frame due to the unphysical coupling of Langmuir modes and EM modes of the relativistically drifting plasma in these simulations. In addition, based on the space-time distribution of the LWFA data in the lab and boosted frame, we propose to use a moving window to follow the drifting plasma to further reduce the computational load. We describe the details of how the NCI is eliminated for the quasi-3D geometry, the setups for simulations which combine the Lorentz boosted frame and quasi-3D geometry, the use of a moving window, and compare the results from these simulations against their corresponding lab frame cases. Good agreement is obtained, particularly when there is no self-trapping, which demonstrates it is possible to combine the Lorentz boosted frame and the quasi-3D algorithms when modeling LWFA to achieve unprecedented speedups.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
