اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدTheoretical model of viscous friction inside steadily sheared foams and concentrated emulsions
218
0
0.0
(
0
)
تأليف
S. Tcholakova
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
In a recent letter (Denkov et al., Phys. Rev. Lett., vol. 100 (2008) p. 138301) we calculated theoretically the macroscopic viscous stress of steadily sheared foam/emulsion from the energy dissipated inside the transient planar films, formed between neighboring bubbles/drops in the shear flow. The model predicts that the viscous stress in these systems should be a proportional to Ca^1/2, where Ca is the capillary number and n = 1/2 is the power-law index. In the current paper we explain in detail our model and develop it further in several aspects: First, we extend the model to account for the effects of viscous friction in the curved meniscus regions, surrounding the planar films, on the dynamics of film formation and on the total viscous stress. Second, we consider the effects of surface forces (electrostatic, van der Waals, etc.) acting between the surfaces of the neighboring bubbles/drops and show that these forces could be important in emulsions, due to the relatively small thickness of emulsion films (often comparable to the range of action of the surface forces). Third, additional consideration is made for bubbles/drops exhibiting high surface viscosity, for which we demonstrate an additional contribution to the macroscopic viscous stress, created by the surface dissipation of energy. The new upgraded model predicts that the energy dissipation at the bubble/drop surface leads to power-law index n < 1/2, whereas the contribution of the surface forces leads to n > 1/2, which explains the rich variety of foam/emulsion behaviors observed upon steady shear. Various comparisons are made between model predictions and experimental results for both foams and emulsions, and a very good agreement is found.
قيم البحث
اقرأ أيضاً
In the absence of coalescence, coarsening of emulsions (and foams) is controlled by molecular diffusion of dispersed phase between droplets/bubbles. Studies of dilute emulsions have shown how the osmotic pressure of a trapped species within droplets
can ``osmotically stabilise the emulsion. Webster and Cates (Langmuir, 1998, 14, 2068-2079) gave rigorous criteria for osmotic stabilisation of mono- and polydisperse emulsions, in the dilute regime. We consider here whether analogous criteria exist for the osmotic stabilisation of mono- and polydisperse concentrated emulsions and foams, and suggest that the pressure differences driving coarsening are small compared to the mean Laplace pressure. An exact calculation confirms this for a monodisperse 2D model, finding a bubbles pressure as P_i = P + Pi + P_i^G, with P, Pi the atmospheric and osmotic pressures, and P_i^G a ``geometric pressure that reduces to the Laplace pressure only for a spherical bubble. For Princens 2D emulsion model, P_i^G is only 5% larger in the dry limit than the dilute limit. We conclude that osmotic stabilisation of dense systems typically requires a pressure of trapped molecules in each droplet that is comparable to the Laplace pressures the same droplets would have if spherical, as opposed to the much larger Laplace pressures present in the system. We study coarsening of foams and concentrated emulsions when there is insufficient of the trapped species present. Rate-limiting mechanisms are considered, their applicability and associated droplet growth rates discussed. In a concentrated foam or emulsion, a finite yield threshold for droplet rearrangement may be enough to prevent coarsening of the remainder.
Phenomenon of foam and emulsion jamming at low shear rates is explained by considering the dynamics of thinning in the transient film, formed between the neighboring bubbles and drops. After gradually thinning down to a critical thickness, these film
s undergo instability transition and thin stepwise, forming the so-called black films, which are only several nanometers thick and, thereby, lead to stronger adhesion between the dispersed particles. Theoretical analysis shows that such film thickness instability occurs only if the contact time between the bubbles/drops in sheared foam/emulsion is sufficiently long, which corresponds to sufficiently low (critical) rate of shear. Explicit expression for this critical rate is proposed and compared to experimental data.
A variety of complex fluids consist in soft, round objects (foams, emulsions, assemblies of copolymer micelles or of multilamellar vesicles -- also known as onions). Their dense packing induces a slight deviation from their prefered circular or spher
ical shape. As a frustrated assembly of interacting bodies, such a material evolves from one conformation to another through a succession of discrete, topological events driven by finite external forces. As a result, the material exhibits a finite yield threshold. The individual objects usually evolve spontaneously (colloidal diffusion, object coalescence, molecular diffusion), and the material properties under low or vanishing stress may alter with time, a phenomenon known as aging. We neglect such effects to address the simpler behaviour of (uncommon) immortal fluids: we construct a minimal, fully tensorial, rheological model, equivalent to the (scalar) Bingham model. Importantly, the model consistently describes the ability of such soft materials to deform substantially in the elastic regime (be it compressible or not) before they undergo (incompressible) plastic creep -- or viscous flow under even higher stresses.
In order to understand the flow profiles of complex fluids, a crucial issue concerns the emergence of spatial correlations among plastic rearrangements exhibiting cooperativity flow behaviour at the macroscopic level. In this paper, the rate of plast
ic events in a Poiseuille flow is experimentally measured on a confined foam in a Hele-Shaw geometry. The correlation with independently measured velocity profiles is quantified. To go beyond a limitation of the experiments, namely the presence of wall friction which complicates the relation between shear stress and shear rate, we compare the experiments with simulations of emulsion droplets based on the lattice-Boltzmann method, which are performed both with, and without, wall friction. Our results indicate a correlation between the localisation length of the velocity profiles and the localisation length of the number of plastic events. Finally, unprecedented results on the distribution of the orientation of plastic events show that there is a non-trivial correlation with the underlying local shear strain. These features, not previously reported for a confined foam, lend further support to the idea that cooperativity mechanisms, originally invoked for concentrated emulsions (Goyon et al. 2008), have parallels in the behaviour of other soft-glassy materials.
The physics of foams and emulsions has traditionally been studied using bulk foam/emulsion tests and single film platforms such as the Scheludko cell. Recently there has been a renewed interest in a third class of techniques that we term as single bu
bble/drop tests, which employ isolated whole bubbles and drops to probe the characteristics of foams and emulsions. Single bubble and drop techniques provide a convenient framework for investigating a number of important characteristics of foams and emulsions, including the rheology, stabilization mechanisms, and rupture dynamics. In this review we provide a comprehensive discussion of the various single bubble/drop platforms and the associated experimental measurement protocols including the construction of coalescence time distributions, visualization of the thin film profiles and characterization of the interfacial rheological properties. Subsequently, we summarize the recent developments in foam and emulsion science with a focus on the results obtained through single bubble/drop techniques. We conclude the review by presenting important venues for future research.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
