اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدOne MEMS Design Tool with Maximal Six Design Flows
152
0
0.0
(
0
)
نشر من قبل
EDA Publishing Association
تاريخ النشر
2008
مجال البحث
الهندسة المعلوماتية
والبحث باللغة
English
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
This paper presents one MEMS design tool with total six design flows, which makes it possible that the MEMS designers are able to choose the most suitable design flow for their specific devices. The design tool is divided into three levels and interconnected by six interfaces. The three levels are lumped-element model based system level, finite element analysis based device level and process level, which covers nearly all modeling and simulation functions for MEMS design. The six interfaces are proposed to automatically transmit the design data between every two levels, thus the maximal six design flows could be realized. The interfaces take the netlist, solid model and layout as the data inlet and outlet for the system, device and process level respectively. The realization of these interfaces are presented and verified by design examples, which also proves that the enough flexibility in the design flow can really increase the design efficiency.
قيم البحث
اقرأ أيضاً
Parametric amplification is an interesting way of artificially increasing a MEMS Quality factor and could be helpful in many kinds of applications. This paper presents a theoretical study of this principle, based on Matlab/Simulink simulations, and p
roposes design guidelines for parametric structures. A new device designed with this approach is presented together with the corresponding FEM simulation results.
Embedded systems are playing an increasingly important role in control engineering. Despite their popularity, embedded systems are generally subject to resource constraints and it is therefore difficult to build complex control systems on embedded pl
atforms. Traditionally, the design and implementation of control systems are often separated, which causes the development of embedded control systems to be highly time-consuming and costly. To address these problems, this paper presents a low-cost, reusable, reconfigurable platform that enables integrated design and implementation of embedded control systems. To minimize the cost, free and open source software packages such as Linux and Scilab are used. Scilab is ported to the embedded ARM-Linux system. The drivers for interfacing Scilab with several communication protocols including serial, Ethernet, and Modbus are developed. Experiments are conducted to test the developed embedded platform. The use of Scilab enables implementation of complex control algorithms on embedded platforms. With the developed platform, it is possible to perform all phases of the development cycle of embedded control systems in a unified environment, thus facilitating the reduction of development time and cost.
In the global competition, companies are propelled by an immense pressure to innovate. The trend to produce more new knowledge-intensive products or services and the rapid progress of information technologies arouse huge interest on knowledge managem
ent for innovation. However the strategy of knowledge management is not widely adopted for innovation in industries due to a lack of an effective approach of their integration. This study aims to help the designers to innovate more efficiently based on an integrated approach of knowledge management. Based on this integrated approach, a prototype of distributed knowledge management system for innovation is developed. An industrial application is presented and its initial results indicate the applicability of the approach and the prototype in practice.
Millimeter wave technology being an emerging area is still very undeveloped. A substantial research needs to be done in this area as its applications are numerous. In the present endeavor, a rectangular patch antenna is designed on thick substrate an
d simulated using SONNET software, also a novel analysis technique is developed for circular patch antenna for millimeter wave frequency. The antenna is designed at 39 GHz on thick substrate and has been analyzed and simulated.The results of the theoretical analysis are in good agreement with the simulated results.
The very significant growth of the wireless communication industry has spawned tremendous interest in the development of high performances radio frequencies (RF) components. Micro Electro Mechanical Systems (MEMS) are good candidates to allow reconfi
gurable RF functions such as filters, oscillators or antennas. This paper will focus on the MEMS electromechanical resonators which show interesting performances to replace SAW filters or quartz reference oscillators, allowing smaller integrated functions with lower power consumption. The resonant frequency depends on the material properties, such as Youngs modulus and density, and on the movable mechanical structure dimensions (beam length defined by photolithography). Thus, it is possible to obtain multi frequencies resonators on a wafer. The resonator performance (frequency, quality factor) strongly depends on the environment, like moisture or pressure, which imply the need for a vacuum package. This paper will present first resonator mechanisms and mechanical behaviors followed by state of the art descriptions with applications and specifications overview. Then MEMS resonator developments at STMicroelectronics including FEM analysis, technological developments and characterization are detailed.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
