اشترك بالحزمة الذهبية واحصل على وصول غير محدود شمرا أكاديميا
تسجيل مستخدم جديدMicroscopic origin of granular ratcheting
235
0
0.0
(
0
)
اسأل ChatGPT حول البحث
ﻻ يوجد ملخص باللغة العربية
Numerical simulations of assemblies of grains under cyclic loading exhibit ``granular ratcheting: a small net deformation occurs with each cycle, leading to a linear accumulation of deformation with cycle number. We show that this is due to a curious property of the most frequently used models of the particle-particle interaction: namely, that the potential energy stored in contacts is path-dependent. There exist closed paths that change the stored energy, even if the particles remain in contact and do not slide. An alternative method for calculating the tangential force removes granular ratcheting.
قيم البحث
اقرأ أيضاً
The existence of a very special ratcheting regime has recently been reported in a granular packing subjected to cyclic loading cite{alonso04}. In this state, the system accumulates a small permanent deformation after each cycle. After a short transie
nt regime, the value of this permanent strain accumulation becomes independent on the number of cycles. We show that a characterization of the material response in this peculiar state is possible in terms of three simple macroscopic variables. They are defined that, they can be easily measured both in the experiments and in the simulations. We have carried out a thorough investigation of the micro- and macro-mechanical factors affecting these variables, by means of Molecular Dynamics simulations of a polydisperse disk packing, as a simple model system for granular material. Biaxial test boundary conditions with a periodically cycling load were implemented. The effect on the plastic response of the confining pressure, the deviatoric stress and the number of cycles has been investigated. The stiffness of the contacts and friction has been shown to play an important role in the overall response of the system. Specially elucidating is the influence of the particular hysteretical behavior in the stress-strain space on the accumulation of permanent strain and the energy dissipation.
Additive manufacturing strives to combine any combination of materials into three dimensional functional structures and devices, ultimately opening up the possibility of 3D printed machines. It remains difficult to actuate such devices, thus limiting
the scope of 3D printed machines to passive devices or necessitating the incorporation of external actuators that are manufactured differently. Here we explore 3D printed hybrid thermoplast/conducter bilayers, that can be actuated by differential heating caused by externally controllable currents flowing through their conducting faces. We uncover the functionality of such actuators and show that they allow to 3D print, in one pass, simple flexible robotic structures that propel forward under step-wise applied voltages. Moreover, exploiting the thermoplasticity of the non-conducting plastic parts at elevated temperatures, we show how strong driving leads to irreversible deformations - a form of 4D printing - which also enlarges the range of linear response of the actuators. Finally, we show how to leverage such thermoplastic relaxations to accumulate plastic deformations and obtain very large deformations by alternatively driving both layers of a bilayer; we call this ratcheting. Our strategy is scalable and widely applicable, and opens up a new approach to reversible actuation and irreversible 4D printing of arbitrary structures and machines.
We develop a statistical framework for the rheology of dense, non-Brownian suspensions, based on correlations in a space representing forces, which is dual to position space. Working with the ensemble of steady state configurations obtained from simu
lations of suspensions in two dimensions, we find that the anisotropy of the pair correlation function in force space changes with confining shear stress ($sigma_{xy}$) and packing fraction ($phi$). Using these microscopic correlations, we build a statistical theory for the macroscopic friction coefficient: the anisotropy of the stress tensor, $mu = sigma_{xy}/P$. We find that $mu$ decreases (i) as $phi$ is increased and (ii) as $sigma_{xy}$ is increased. Using a new constitutive relation between $mu$ and viscosity for dense suspensions that generalizes the rate-independent one, we show that our theory predicts a Discontinuous Shear Thickening (DST) flow diagram that is in good agreement with numerical simulations, and the qualitative features of $mu$ that lead to the generic flow diagram of a DST fluid observed in experiments.
The atomic theory of elasticity of amorphous solids, based on the nonaffine response formalism, is extended into the nonlinear stress-strain regime by coupling with the underlying irreversible many-body dynamics. The latter is implemented in compact
analytical form using a qualitative method for the many-body Smoluchowski equation. The resulting nonlinear stress-strain (constitutive) relation is very simple, with few fitting parameters, yet contains all the microscopic physics. The theory is successfully tested against experimental data on metallic glasses, and it is able to reproduce the ubiquitous feature of stress-strain overshoot upon varying temperature and shear rate. A clear atomic-level interpretation is provided for the stress overshoot, in terms of the competition between the elastic instability caused by nonaffine deformation of the glassy cage and the stress buildup due to viscous dissipation.
We consider the unidirectional particle transport in a suspension of colloidal particles which interact with each other via a pair potential having a hard-core repulsion plus an attractive tail. The colloids are confined within a long narrow channel
and are driven along by a DC or an AC external potential. In addition, the walls of the channel interact with the particles via a ratchet-like periodic potential. We use dynamical density functional theory to compute the average particle current. In the case of DC drive, we show that as the attraction strength between the colloids is increased beyond a critical value, the stationary density distribution of the particles loses its stability leading to depinning and a time dependent density profile. Attraction induced symmetry breaking gives rise to the coexistence of stable stationary density profiles with different spatial periods and time-periodic density profiles, each characterized by different values for the particle current.
سجل دخول لتتمكن من نشر تعليقات
التعليقات
جاري جلب التعليقات
سجل دخول لتتمكن من متابعة معايير البحث التي قمت باختيارها
